Important Note - prime3 APS91 Owner's Manual

APS91
19. Servicing - Do not attempt to service this product yourself, as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all servicing to quali ed service personnel.
20. Please remove the power plug form the main power source or wall power source when not in use. When
plugged in to a power source, the system is in standby mode, so the power is not entirely cut off.
21. Replacement parts - When replacement parts are required, ensure that the service technician has used
replacement parts speci ed by the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in re, electric shock or other hazards.
22. Mains fuses - For continued protection against re hazard, use fuses only of the cor rect type and rating.
23. Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If
you do, the boombox may be damaged when a peak level section is suddenly played.
24. The only means of completely disconnec ting the product from the power supply is by removing the
power cord from the wall outlet or the product. The wall outlet or the power cord entry to the product
must remain freely accessible at all times while the produc t is in use.
25. Try to install the product near a wall socket or extension cord and shall be easily accessible.
26. The highest environmental temperature suitable for this product is 35°C.
27. ESD hints - If the product maybe reset or not reset to operation of control due to elec trostatic discharge,
just switch off and reconnect again, or move the product to another location.
28. Battery
1). The batteries must not be exposed to excessive heat such as sunshine, re or the like.
2). The batteries should be drawn to the environmental aspects of battery disposal.
3). Battery usage CAUTION-to prevent battery leakage which may result in body injuries, property
damage, or damage to the apparatus:
- Install all batteries correctly, + and - as marked on the apparatus.
- Do not mix batteries (old and new or carbon and alkaline, etc.)
- Remove batteries when the unit is not used for a long time.
ERP2 (Energy Related Products) note
This product with ecodesign complies with the stage 2 requirements of C ommission Regulation (EC) NO.
1275/2008 implementing Direc tive 2009/125/EC regard to standby and off mode elec tric power
consumption of electronic household and office equipment.
After 60 minutes without any audio input, the device will automatically switch into standby mode . Follow up
the instruction manual to resume the operation.

Important note:

This device is equipped with an energy saving mode: if no signal is given dur ing 60 minutes the device will
switch automatically into standby mode in order to save energy (ERP 2 standard). Please note that low
volume setting in the audio source may be recognized as "no audio signal": this will affect the capability of
signal detection from the device and can also originate an automatic switch into standby mode. If this
happens please reactivate the audio signal transmission or increase the volume setting on the audio source
player (MP3 player, etc.), in order to resume playback. Please contact the local service center if the problem
remains.
4