Line In/Aux In - prime3 APS91 Owner's Manual

APS91
Auto scan and tuning: Power on the unit and press the mode button to enter FM mode, Long press 2
seconds the play/pause button to scan and save the available station. Press the previous/next button to
switch the available preset station. Long press the previous/next button for 2 seconds to scan and play the
available station in upward or downward frequency. Rotate the volume knob to increase or decrease the
output volume. The unit can maximum save up to 64 preset stations.
Key-in the station frequency number by digit button from the remote controller can skip and play the
relative station directly; Key-in the preset station number from the remote controller can skip and play the
saved station.
Important note: the voice of the broadcasting station may get worse during charging due to interference;
you can try to remove charging and turn off the disco light for better listening.
USB/microSD(TF) card playback
Please copy the MP3 format music into the USB or microSD card device (max supported 256GB) before
starting the playing, and then insert the device into the slot on the top panel of the unit. Power on the unit,
and press the mode button to enter the USB or microSD playback mode; the speaker will read out the device
automatically, and get the music output after a few seconds.
In USB/microSD card playback mode, press the previous /next button to switch the track. Press and hold the
previous/next button to fast-rewind/fast-forward the current track, and resume normal playback after
releasing the button. Rotate the volume knob to increase or decrease the volume level; press the play/pause
button to play or pause the music; press the repeat button repeatedly from remote controller to switch play
mode between repeat one/random/ repeat all; press the digit button from remote controller for music track
fast selections; press the stop button from remote controller can stop the music playback, press the
play/pause button to start the playback from 1st track.
Note:
a. Using an USB extension cable for USB device playback connection is not recommend, due to that may
cause data loss during transfer, and get noise output.
b. The max supported USB/microSD device is up to 256G.
c. The supported music le format is MP3/WMA/WAV/FLAC/APE, but not guarantee all of them.
d. The USB and mciroSD play modes are only available when the device is plugged in.

LINE IN/AUX IN

Using the supplied audio cable connect the AUX jack on the speaker top panel with the line out or the
headphone jack on any other external audio player like mp3 player etc. Power on the speaker and short press
the Mode button to enter the AUX IN playback mode; select and play the music from your external audio
player, and then the sound will output from the speaker.
Notes:
In AUX IN mode, the main control is on your external audio player side. However, you still can increase or
decrease the volume on the speaker side.
10