Table of Contents
Advertisement
device. It is also indicated
near the i.L1NK
iuterti_ce on some device.
The baud rate may differ from the indicated
value when the unit is connected
to device with
a different maximum
baud rate.
* What is Mbps?
Mbps stands for "megabits per second," or the
amount of data that can be sent or received in one
second. For exampl< a baud rate of 100Mbps mean s
that 100 megabits of data can be sent in one second.
To use i.LINK functionson this unit
For details on how to dub when this unit is
connected
to other vide<) device having a DV
1utert_._ce, see page 60, 61.
This unit can also be connected
to other i.LINK
(DV Interface)
compatible
device made by
Sony (e.g. a VAIO series personal computer) as
well as to video device.
Before connecting
this unit to your computer,
make sure that application
software supported
by this unit is already installed on your
computer.
Some i.L1NK compatible
video device such as
Digital Televisions,
DVD recorders/players,
and MICROMV
recorders/players
are not
compatible
with DV device. Bel\)re connecting
to other device, be sure to confirm
whether the
device is compatible
with DV device or not.
For details on precautions
and compatible
application
software,
refer also to the operating
instructions
for the device to be connected.
Aboutthe required i.LINK cable
Use the Sony i.L1NK 4-pin-to-4-pin
cable
(during DV dubbing).
i.LINK and _ are Irademarks of Sony
Corporation.
98
Additional Information
Maintenanceand
precautions
On use and care
• Do not use or store the camcorder
and
accessories
in the following
locations.
Anywhere
extremely
hot or cold. Never
leave them exposed to temperatures
above
60°C (140°F), such as under direct sunlight,
near beaters or in a car parked in the sun.
They may malfimctiou
or become
deformed.
- Near strong magnetic fields or mechanical
vibration.
The camcorder
may malfi_mction.
Near strong radio waves or radiation.
The
camcorder
may not be able to record
properly.
- Near AM receivers
and vide<) equipment.
Noise may occur.
Sandy beach or anywhere
dusty. 1[' sand or
dust gets in your camcorder,
it may
mallimction.
Sometimes
this malflmction
catmot be repaired.
Near windows
or outdoors,
where the LCD
screen, the viewfiuder,
or the lens may be
exposed to direct sunlight.
This damages
the inside of the viewfiuder
or the LCD
screen.
Anywhere
very humid.
• Operate your camcorder
on DC 7.2 V (battery
pack) or DC 8.4 V (AC Adaptor).
• For DC or AC operation,
use the accessories
recommended
in these operating
instructions.
• Do not let your camcorder
get wet, l\)r
example,
fi'om rain or sea water. If your
camcorder
gets wet, it may malfunction.
Sometimes
this mallimction
calmot be
repaired.
• If any solid object or liquid get inside the
casing,
unplug your camcorder
and have it
checked by a Sony dealer befk_re operating
it
any fnrther.
• Avoid rough handling,
disassembling,
modifying,
physical
shock, or impact such as
hammering,
dropping or stepping on the
product.
Be particularly
careful of the lens.
• Keep the POWER
switch setting to (CHG)
OFF when you are not using your camcorder.
Advertisement
Table of Contents
