Table of Contents
Advertisement
4 Turn the SEL/PUSH
EXEC dial to select
the desired character,
then press the dial.
.......... _2_
FGH_J
878_0
KUMNO igiO0
pcm_ _i¢0
............ f;P
z& ?t iONgl_
,, _IOt/A
[TITLE]: END
5
6
To erase a character:
Select ICe].
To enter a space: Select [Z& ? !], then
select the blank part between & and ?.
To select alphabet and Russian
characters:
Select [-)P2
].
Turn the SEL/PUSH
EXEC dial to select
tile next character,
and enter tile character
ill
tile same lnanner.
When you have finished entering
characters,
turn the SEL/PUSH
EXEC
dial to select [O K1, then press tile dial.
The title is stored in memory.
Turn the SEL/PUSH
EXEC dial to
select the title you want to insert, then
press the dial.
To insert ml original title, turn the SEE/
PUSH EXEC dial to select [CUSTOM 1'"]
or [CUSTOM2'"], and press the dial, then
select [OK] and press tile dial.
Change
[COLOR],
[SIZE],
or
[POSITION]
as necessary.
1 Turn the SEL/PUSH
EXEC dial to select
[COLOR],
[SIZE], or [POSITION],
then
press tile dial. Tile selected
item appears
on the screen.
2 Turu tile SEL/PUSH
EXEC dial to select
tile desired item, then press the dial.
Repeat steps 1 and 2 until the title is laid
out as desired.
[COLOR]
(color)
[WHITE] *--+ [YELLOW]
[VIOLET1 *--+ [RED] _
[CYAN]
[GREEN] _-+ [BLUE]
[SIZE]
(size)
[SMALL1 ,---+ [LARGE1
(Yon can only select [SMALL]
wheu
you are emering more than 13
characters.)
[POSITION]
(position)
You call select ffnm 8 to 9 choices.
Turn
the SEL/PUSH
EXEC
dial to
select
[OK], then
press
the dial.
The title appears.
Press
REC
START/STOP.
Press TITLE
at the scene
you want
to
erase
the title off.
To superimposethe title while you are
recording
Press TITLE
and carry out steps 2 to 4. When
you press the SEL/PUSH
EXEC dial at step 4.
tile title is recorded.
0
Notes
• If you display the menu while superimposing
a title,
the title is not recorded
while the menu is di,91ayed.
• When you are selecting
and setting the title, the title
displayed
on the screen is not recorded.
• When you superimpose
a title while you arc,
recording,
the beep does not sound.
• When you are using your camcorder
on the battery
pack and do not operate
it for 5 minutes,
Ibe power
automatically
goes off as the default
setting.
If you
may take 5 minutes or longer to enter characters,
set
[A.SHLIT OFF] in the _
(OTHERS)
menu to
[NEVER]
(p. 57). The power will not be turned off.
Even Ihough the power goes off, the characters
you
have entered
remain
stored in memory.
Turn the
power back on, then start again from step I to
continue
superimposing
the title.
• For t'l| N TRV 1381338:
The date and time, or either of them, may not be
displayed
depending
on the size or position
of the
title.
"_° Tip
• To change
a created title_ select tile title ill step I.
Turn Ibe SEL/PUSH
EXEC dial to select [CREATE/
EDITI
and press the dial then reselect
characters.
32 Recording
Advertisement
Table of Contents
