Beko UWR82A2I User Manual page 57

If you only want to drain the water without spinning the laundry, select the "Spin+Pump programme,
and use the Spin Speed Adjustment button to select the No Spin function. Press the Start/Pause
button.
C
INFORMATION
• Use a lower spin speed for delicate laundries.
4.3.8 Temperature selection
Whenever a new programme is selected, the recommended temperature for the selected programme
appears on the temperature indicator.
To decrease the temperature, press the Temperature Adjustment button. Temperature will decrease
gradually. When the cold level is selected, temperature level lights will not be on.
C
INFORMATION
• If the programme has not reached the heating step, you can change the temperature without
switching the machine to Pause mode.
4.3.9 Spin speed selection
Whenever a new programme is selected, the recommended spin speed of the selected programme is
displayed on the spin speed indicator.
To decrease the spin speed, press the Spin Speed Adjustment button. Spin speed decreases gradually.
Then, depending on the model of the product, "Rinse Hold" and "No Spin" options appear on the
display. When the "No Spin" function is selected, rinse level indicator lights will not be on.
Rinse hold
If you are not going to unload your clothes immediately after the programme ends, you can use rinse
hold function to keep your laundry in the final rinsing water in order to prevent them from getting
wrinkled when there is no water in the machine. Press Start/Pause button after this process if you
want to drain the water without spinning your laundry. Programme will resume where it left off, drain
the water and then it will be complete.
If you want to spin the laundry held in water, adjust the Spin Speed and press Start/Pause button.
Programme will resume. Water will be drained, laundry will be spun and the programme will end.
C
INFORMATION
• If the programme has not reached the spin step, you can change the spin speed without
switching the machine to Pause mode.
4.3.10 Auxiliary function selection
Select the desired auxiliary functions before starting the programme. You can also select or cancel
auxiliary functions suitable for the running programme without pressing the Start/Pause button
while the machine is operating. To do this, the machine must be in a step before the auxiliary
function you are going to select or cancel. If the auxiliary function cannot be selected or cancelled,
light of the relevant function will flash 3 times to warn the user.
C
INFORMATION
• If a second auxiliary function conflicting with the first one is selected before starting the
machine, the function selected first will be cancelled and the second auxiliary function
selection will remain active.
• An auxiliary function which is not compatible with the programme cannot be selected. (See
"Programme and consumption table")
• Auxiliary Function buttons may vary according to the model of the machine.
Washing Machine / User's Manual
19 / EN