Beko UWR82A2I User Manual page 58

4.3.10.1 Auxiliary functions
Prelavaggio
•
A Prewash is only worthwhile for heavily soiled laundry. Not using the Prewash will save energy,
water, detergent and time.
C
INFORMATION
• Prewash without detergent is recommended for tulle and curtains.
• Rapido+
When this function is selected, durations of relevant programmes get shorter by 50%.
Thanks to the optimised washing steps, high mechanic activity and optimum water consumption,
high washing performance is achieved in spite of the reduced duration.
• Extra Risciacquo
This function enables the machine to carry out another rinsing cycle in addition to the one carried
out after the main wash. Thus, the risk for sensitive skins (babies, allergic skins, etc.) to be
effected by the minimal detergent remnants on the laundrwy can be reduced.
4.3.10.2 Functions/Programmes Selected by Pressing the Function Buttons for 3
Seconds
• Drum Clean
To select this programme, press and hold the auxiliary function button 1 for 3 seconds.
Use it regularly (every 1-2 months) to clean the drum and ensure the required hygiene is provided.
Run the programme while the machine is totally empty. To obtain better results, put powder lime-
scale remover for washing machines into the detergent compartment no. "2". When the programme
is over, leave the loading door ajar so that the inside of the machine gets dry.
C
INFORMATION
• This is not a washing programme. It is a maintenance programme.
• Do not run this programme when there are any objects in the machine. If you try to do so, the
machine will automatically detect that there is load inside and abort the programme.
• Child Lock
You can prevent children from tampering with the machine by using the Child Lock feature. Thus you
can avoid any changes in a running programme.
C
INFORMATION
• If the Programme Selection knob is turned when the Child Lock is enabled, "Con" appears on the
display. While the Child Lock is enabled, you cannot make any change in the programmes, the
selected temperature, the speed or the auxiliary functions.
• Even if another programme is selected with the Programme Selection knob while the Child Lock
is enabled, previously selected programme will continue running.
To enable Child Lock:
Press and hold the Auxiliary Function button 2 for 3 seconds. While you're holding the button
pressed for 3 seconds, C03, C02 and C01 will be displayed respectively.Then, "Con" will be displayed
to warn the user that child lock is enabled.If you press any button or turn the Programme Selection
knob while the Child Lock is enabled, the same warning will be displayed.
To disable Child Lock:
Press and hold the Auxiliary Function button 2 for 3 seconds while the programme is running. While
you're holding the button pressed for 3 seconds, C03, C02 and C01 will be displayed respectively.
Then, "COF" will be displayed to warn the user that child lock is disabled.
20 / EN
Washing Machine / User's Manual