Sears Kenmore 89682 Owner's Manual page 7

Removing and replacing the microwave oven (cont.)
To replace:
1. Carefully lift microwave oven and hang it on the
support tabs at the bottom of the mounting plate.
2, Rotate the front of the microwave oven cabinet
downward. Thread the power supply cord
through the power supply cord hole in the
bottom of the upper cabinet.
3. Rotate the microwave oven towards the cabinet.
Push the microwave oven against the mounting
)late until locking latch snaps into the cabinet.
2boff-_ -_" _"
4. Replace the two
bolts secudng the
microwave oven to
the upper cabinet.
5. Untape the door and replace the turntable and
support.
6. Replace the vent grille.
7. Replace the two screws in the top of microwave
oven cabinet (the screws located closest to front
corners).
8. Tighten the two bolts securing the microwave
hood to the upper cabinet until there is no gap
between the upper cabinet and microwave hood.
9. Reinstall filters (see "Installing and caring for the
filters" in the "Caring for Your Microwave Oven"
section, if needed).
10. Plug in microwave oven or reconnect power.