Advertisement
DO NOT cover the product.
8
DO NOT use the panel dryer outdoors, or in damp, or wet locations.
8
DO NOT operate within the vicinity of flammable liquids, gases or solids.
9
WARNING! Never use in explosive situations.
‰
Keep children and unauthorised persons away from the work area.
9
When not in use, store the panel dryer carefully in a safe, dry, childproof location.
9
Maintain a safe and tidy working environment.
9
In case the machine is used in a spray booth, it is a must to purify the in-house air first.
9
Be careful of the uneven floor when moving the machine to avoid any overturn.
9
Remove all objects in front of the lamp tubes before use.
9
Keep any person at least 4 meters away from the painting surface.
9
2. INTRODUCTION
Lamps emit short wave infrared heat, ideal for optimised drying of water based paints. In-built timer turns lamps off after a set time. Fitted with
four swivel castors, two with brakes for maximum manoeuvrability and safe positioning. Flexible manoeuvrable lamp system allows each heater
to be adjusted and locked in position around the contours of the vehicle, ensuring maximum area coverage. Height adjustment is made using the
locking gas strut, offering near weightless movement of the support arm.
3. SPECIFICATION
Model No: ................................................................ IR3000S
Element Power: ...........................................................3150W
Number of Elements: ............................................ 3 x 1050W
Optimal Baking Area: ......................................... 1.0m x 0.8m
Operating Temperature (°C): ..................................... 40-70°C
4. CONTENTS
.
. assembly
4.1.
EMITTER HEAD ASSEMBLY
No.
Description
1
Front castor wheel
2
Back castor wheel
3
Pedestal
4
Post
5
Gas spring handle
6
AM8 adjustable handle
© Jack Sealey Limited
No.
Description
7
Gas spring
8
Connective plate
9
U shaped support
10
Flat cross arm
11
Round cross arm
12
Side panel of emitter
Original Language Version
Power Supply: ................................................................ 3.7m
Reflector size: .............................................530mm x 140mm
Supply: ....................................................... 230V ~ 50Hz 16A
Timer Range: .......................................................... 0-30mins
No.
Description
13
Bent plate
14
Front protective grill
15
Connection box
16
Emitter tube
17
Panel
18
Timer
19
Emitter side panel
No.
Description
20
Small reflective panel
21
Rear panel
22
Ceramic connector
23
Reflective panel
24
Lamp tube switch
25
Circuit breaker
IR3000S Issue:3 31/05/23
Advertisement
