Sony Blu-ray Disc BDP-S470 Operating Instructions Manual page 28

Hide thumbs Also See for Blu-ray Disc BDP-S470:
Table of Contents

Advertisement

Thereisnosound or thesound is not
output c orrectly.
Check
that all the conuectiug
cables
are
securely
conuected
(page
12).
Switch
the input
selector
on your AV
amplifier
(receiver)
so that the audio
signals
of the player
are output
fi'om your AV
amplifier
(receiver).
If the audio
signal
does not come through
the DIGITAL
OUT
(OPTICAL/
COAXIAL)/HDMI
OUT jack,
check
the
audio
settings
(page 23).
For HDM! conuections,
try the following:
@Turn
the player
off and on again.
@Turn
the conuected
equipment
off and on again.
@Disconuect
and then reconnect
the HDMI
cable.
For HDMI
connections,
if the player
is
connected
to a TV through
an AV amplifier
(receiver),
try connecting
the HDMI
cable
directly
to the TV. Refer
also to the
instruction
mauual
supplied
with the AV
amplifier
(receiver).
The HDMI
OUT jack is connected
to a DVI
device
(DVI jacks
do not accept
audio
signals).
The device
connected
to the HDMI
OUT
jack does not support
the audio
format
of
the player.
Check
the audio
settings
(page
23).
TheHDAudio (DolhyDigitalPlus, Dolhy
TrueHD, D TS-HD HighResolution A udio,
andDTS-HD Master Audio)is notoutput
byhitstream.
Set "BD Audio
MIX
Setting"
to "Oft _' in
the "Audio
Settings"
setup
(page 23).
Check
that the connected
AV amplifier
(receiver)
is compatible
with each HD
Audio
format.
Theinteractive audioisnotoutput.
Set "BD Audio MIX
Setting"
to "On" in tile
"Audio
Settings"
setup
(page
23).
Thediscdoesnotplay.
Tile disc is dirty or skewed.
The disc is upside
down. Insert
the disc with
the playback
side facing
down.
The disc has a format
that cannot
be played
back by this player
(page
31).
The player
cannot
play a recorded
disc that
is not correctly
finalized.
The region
code on the BD or DVD
does
not match
the player.
Theplayerdoesnotdetect a USBdevice
connected t o theplayer.
Make
sure that tile USB device
is securely
connected
to the USB jack.
Check
if the USB device
or a cable
is
damaged.
Check
if the USB device
is on.
If the USB device
is connected
via a USB
hub, connect
the USB device
directly
to the
player.
28

Advertisement

Table of Contents
loading

Table of Contents