Additional Information; Troubleshooting - Sony Blu-ray Disc BDP-S470 Operating Instructions Manual

Troubleshooting
If you experience any of the following
difficulties while using the player, use this
troubleshooting guide to help remedy the
problem before requesting repairs. Should
any problem persist, consult your nearest
Sony dealer.
!) i )il ¸/
Additional
Information
Thereis no picture or thepicture isnot
outputcorrectly.
Check that all the conuectiug cables are
securely conuected (page 12).
Switch the input selector on your TV to
display the signal fi'om the player.
Reset the video output resolution to the
lowest resolution by pressing • on the
player for more than 10 seconds.
For HDMI connections, try the following:
@Turu the player off and on again. @Turn
the connected equipment off and on again.
@Disconnect and then reconnect the HDMI
cable.
The HDMI OUT jack is connected to a DVI
device that does not support copyright
protection technology.
For HDMI connections, check the "Output
Video Format" settings in the "Screen
Settings" setup (page 22).
When the analog signals are also output, set
"BD/DVD-ROM 1080/24p Output" to
"Oft _' in the "Screen Settings" setup
(page 22).
For B D-ROMs, check the "BD/DVD-ROM
1080/2@ Output" setting in the "Screen
Settings" setup (page 22).
Thedisplay language on thescreen
switches automaticallywhen connected t o
the HDMIOUT jack.
When "Control for HDMI" is set to "On"
(page 25), the display language on the
screen automatically switches according to
the language setting of the connected TV (if
you change the setting on your TV, etc.).
m.
m
m.
,_condnued
27