Sony CDP-CE375 Operating Instructions Manual page 10

Using the CD display (continued)
To check the remaining time
Press TIME during playback.
Each time you press this button while playing a
disc, the display changes as shown in the chart
below.
Playing time and number on the current track
--* Remaining time on the current track -_.
Remaining time on the disc
Notes
• When the disc has more than 24 tracks, " . "
appears in,cad of the remaining time.
• The remaining time on the disc appears only when
the disc is played in Continuous Play.
You can open the disc tray while playing a disc
so that you can check what discs are to be
played next and replace discs without
interrupting playback of the current disc.
1 Press EX-CHANGE.
The disc tray opens and two disc
compartments appear. Even if the player is
playing a disc, it doesn't stop playing.
2 Replace discs in the compartments
with new ones.
The player plays the disc oll the left side
compartment after 1he current disc, and then
the one on the right side compartment.
3 Press DISC SKIP.
The disc tray turns and other two disc
compartments appear.
4
Replace discs in the compartments
with new ones.
5 Press EX-CHANGE.
The disc tray closes.
While the disc tray is open by
pressing the EX-CHANGE button
• If the playback of the current disc ends, the
player stops playing. If the disc is played in
1 DISC Repeat Play mode (see page 8), the
current disc starts playing again.
• In ALL DISCS Shuffle Play mode (see page
8), tracks are reshuffled on the current disc.
• In Program Play mode (see page 11), only
the tracks on the current disc are played.
• DO not push the disc tray to close it in
Step 5, as you may damage the
player.
10