The model and serial numbers are located at the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. Serial No. AC power cord must be changed only at the qualified service shop.
Table of Contents Parts Identification Front Panel ... 4 Rear Panel ... 5 Remote Control ... 5 Getting Started Inserting Batteries Into the Remote Control (CDP-CE375 only) ... 6 Hooking Up the System ... 6 Playing CDs Loading the CD ... 7 Playing the CD ––...
You can reduce the output level up to –20 dB. When you reduce the analog output level, “FADE” appears in the display. When you turn off the player, the analog output level automatically returns to the maximum level. CD player To mains Amplifier To mains...
• Fading In or Out (see page 12) • Adjusting the output level using the ANALOG OUT LEVEL +/– buttons on the remote POC-15 Optical cable (not supplied) Digital component CD player DIGITAL DIGITAL INPUT OPTICAL OPTICAL Note When you connect via the DIGITAL OUT...
Playing the CD –– Normal Play/Shuffle Play/Repeat Play This unit lets you play the CD in different play modes. Press PLAY MODE repeatedly until the mode you want appears. Select To play ALL DISCS All discs in the player (Continuous consecutively in the order of disc Play) number.
Other Operations Do this Stop playback Press x. Pause Press X. Press X again or H to resume play. Select a track During play or pause, turn lAMSL clockwise (to go forward) or counterclockwise (to go backward) (or press >( to go forward) or .
Using the CD display (continued) To check the remaining time Press TIME during playback. Each time you press this button while playing a disc, the display changes as shown in the chart below. Playing time and number on the current track t Remaining time on the current track t Remaining time on the disc Notes...
Programming the CD tracks You can arrange the order of the tracks on the discs and create your own program. The program can contain up to 32 “steps” — one “step” may contain a track or a whole disc. Press PLAY MODE repeatedly until “PROGRAM”...
Programming the CD tracks (continued) Changing the track order You can change your program before you start playing. You need to Erase a track Press CHECK until the track you don’t want appears in the display, then press CLEAR. Erase the last track Press CLEAR.
Start recording on the deck and then press H on the player. Reverse the tape to side B and press H or X on the player to resume playing the remaining tracks. To cancel Time Edit Press PLAY MODE. Tips •...
If you have any questions or problems concerning your player, please consult your nearest Sony dealer. Notes on CDs On handling CDs • To keep the disc clean, handle the disc by its edge.
Should any problem persist, consult your nearest Sony dealer. There’s no sound. • Check that the player is connected securely. • Make sure you operate the amplifier correctly.