Optional Accessories; Installation - Eaton TRIPP LITE Series Owner's Manual

Optional Accessories

• N202-Series Cat6 Snagless Patch Cables
• U022-Series USB 2.0 Cables
• UR022-Series Reversible USB 2.0 Cables
• U030-Series USB 2.0 5-Pin Mini-B Cables
• UR030-Series Reversible USB 2.0 5-Pin Mini-B Cables
• U050-Series USB 2.0 Micro-B Cables
• UR050-Series Reversible USB 3.0 Micro-B Cables

Installation

Note: Test to make sure that the entire installation works properly before
pulling cables through ceilings or walls.
1. Connect the transmitter unit to an available USB port on your
computer with a USB 2.0 cable.
2. Connect the RJ-45 ports on the transmitter and receiver units
with Cat5e/Cat6 cable.
Notes:
• For the B203-101-IND and B203-104-IND models, the distance
between the transmitter and receiver units must not exceed 150 ft.
(45 m).
• For the B203-101-IND-ER and B203-104-IND-ER models, the distance
between the transmitter and receiver units must not exceed 330 ft.
(100 m).
3. Connect a USB 2.0 device to each available port on the
receiver unit.
3