Samsung VAC9013BP Operating Instructions Manual page 5

DJ68-40015J 2001.9.159:34AM 70125 D
ASSEMBLING THE VACUUM CLEANER 一 一
ATTACHING THE HOSE TO THE DEN
Slide the Hose Clamper into the canister
Inlet until it clicks into place.(Fig. A-A)
ASSEMBLING THE EXTENSION WAND
Slide the narrow end of one Extension
Wand section into the other Wand
Extension.(Fig. A-B) Depress the locking
button with your thumb and continue
sliding the Extensions together.
the locking button snaps into the hole in
the other Wand. Make sure the locking
button snaps into place completely.
ATTACHING THE EXTENSION WAND
TO THE HOSE
Slide the handle end of the Hose over the
end of the Wand with a locking button.
(Fig A-C) Turn the Hose and Wand in
opposite directions until the locking button
on the Wand snaps into the hole on the Hose. Make sure the locking button snaps
into place completely.
ATTACHING THE POWER BRUSH
Slide the free end of the Extension Wand onto the Power Brush Wand until the
locking button clicks into place.(Fig. B-A) Hold Power Brush Electrical Cord against
the back of the Extension Wand.(Fig. B-B) Press Power Brush cord into the grooves
of the Cord Clips.(Fig. B-C) Plug the Power Brush Cord into the Hose Electrical
Outlet.(Fig. B-D) Your vacuum cleaner is ready for use.
(GB) 4
an Ki