KX-TG9391T/KX-TG9392T/KX-TGA939T
11.4.2.2. Batch file Setting
Note:
• "*****" varies depending on the country.
11.4.2.3. Commands
See the table below for frequently used commands.
Command name
rdeeprom
readid
writeid
setfreq
getchk
wreeprom
bursttx
textrx
tph
tpl
Function
Read the data of FLASH
Read ID (RFPI)
Write ID (RFPI)
Adjust Frequency of RFIC
Read checksum
Write the data of FLASH
Burst TX mode
Test RX mode
High TX mode
Low TX mode
Example
Type "rdeeprom 00 00 FF", and the data from address
"00 00" to "FF" is read out.
Type "readid", and the registered ID is read out.
Type "writeid 00 18 E0 0E 98", and the ID "0018 E0 0E
98" is written.
Type "setfreq nn".
Type "getchk".
Type "wreeprom 01 23 45". "01 23" is address and "45"
is data to be written.
Type "bursttx"
Type "testrx"
Type "tph"
Type "tpl"
72