Advertisement
7
CHANGING TABLE ASSEMBLY - MATTRESS PAD ASSEMBLY
7a. Place the Mattress Pad (14) on its side,
on the top shelf. Position the straps on
the back of the mattress pad over the
insertions provided on the top shelf.
7b. Position the Nuts (G) on the insertions
below the top shelf. Position the Washers
(F) over the insertions on the top shelf.
7c. Attach the Bolts (E) in the insertions
provided on the strap fixing the mattress
pad to the top shelf.
RESTRAINT HARNESS SYSTEM USE:
• Place the infant on the changing table's
mattress pad.
• Position the restraint harness over the
middle of the infant's torso and insert the
buckled ends into each other until they
lock shut with a click.
• Gently pull the loose ends of the strap to
lightly snug the restraint harness around
the infant.
MAINTENANCE:
• Check fasteners periodically for
tightness.
• Do not over-tighten. This may cause
distortion or breakage.
FALL HAZARD:
• Always keep the child within arm's reach.
• Always use a restraint belt to prevent
falls.
• Always secure the pad to the changing
surface using a bolt & nut and washer.
E
Bolt M6 X 20mm (x2)
Boulon M6 X 20mm (x2)
Perno M6 X 20mm (x2)
20
F
Washers (×2)
Rondelles (×2)
Arandelas (×2)
14
(E)
(F)
(G)
G
Nuts (x2)
Noix (x2)
Nueces (x2)
(E)
(F)
(G)
By
Advertisement
