Viking K-1700-3 Technical Practice page 4
Handsfree phone with keypad
Hide thumbs
Also See for K-1700-3:
- Technical practice (4 pages) ,
- Product manual (8 pages) ,
- Application note (4 pages)
Advertisement
B. Volume Adjustments
1. Microphone: Certain noisy locations (background traffic, machinery or wind) may cause one way talk path (only microphone
audio is heard). In this case, the microphone volume may need to be decreased as shown above.
2. Speaker: To increase, decrease or turn off the speaker (for monitoring purposes only), adjust the speaker volume control as
shown above.
C. Auto-Answer Feature
With DIP switch 5 in the "ON" position (default), the K-1700-3 will automatically answer the line during the first incom-
ing ring. This feature is useful for monitoring entrances. In the "OFF" position, the K-1700-3 will not automatically
answer incoming calls.
D. Push Button Hang Up
With DIP switch 6 in the "ON" position (default), the "Call" button alternately connects and disconnects calls. In the
"OFF" position, the "Call" button is only used to connect and the K-1700-3 must rely on call progress (busy, return to
dial tone, silence time-out, or maximum call time) for an automatic disconnect.
E. VOX (Talk/Listen) Switching Speed
With DIP switch 8 in the "OFF" position (default), the VOX switching speed (delay time between talk and listen mode)
is set to fast (0.2 seconds). In the "ON" position, it is set to slow (0.7 seconds).
F. Advanced Call Progress Detection
The K-1700-3 will output 3 beeps and automatically hang-up after detecting any of the following: busy signal (standard
or fast/reorder), CPC (short break in line current when called party hangs up), return to dial tone, maximum call time
or silence time out.
A
p
p
l
i
c
a
t
i
o
A
p
p
l
i
c
a
t
i
o
A. C-2000A Advanced Door/Gate and Entry Phone Controller
Need More Information on the C-2000A?
?
Call (715) 386-4345 and select 156.
B. K-1900-3 Apartment/Office Entry Dialer
Need More Information on the K-1900-3?
?
Call (715) 386-4345 and select 312.
P
r
o
d
u
c
t
S
u
p
p
o
r
P
r
o
d
u
c
t
S
u
p
p
o
r
Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or
subsidiaries assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate
such changes.
Fax Back Doc 157
(DIP Switch 5)
(DIP Switch 6)
n
s
n
s
The C-2000A allows up to 4 entry phones to call into your existing residential or busi-
ness phones or phone system. Tenants may answer the call, converse with the visi-
tor and activate a contact closure to control electronic gates or door strikes.
The C-2000A provides "Caller ID," "Call Waiting ID" and "Call Waiting" tone when the
phone line is in use. Tenants may gain entry at each gate by entering a Touch Tone
keyless entry code.
Tenants may call out to each entry phone for monitoring purposes. An auxiliary input
is also available for connecting a common garage door opener/receiver and auxiliary
keyless entry keypads.
The K-1900-3 converts any Touch Tone phone into a multi-number auto dialer that
will store up to 150 telephone numbers in non-volatile E
K-1700-3 or K-1900-8 phones to provide vandal resistant handsfree or handset
communication.
When a call initiated by the K-1900-3 is answered by an apartment or business ten-
ant, a built-in contact closure may be activated to control an electric gate or door
strike. Up to 150 keyless entry codes may also be programmed, providing tenants
with keyless entry. The K-1900-3 can be programmed locally or remotely using a
standard Touch Tone phone. The K-1900-3 has built-in user dialing restriction to help
prevent unauthorized calls and toll fraud.
t
L
i
n
e
.
.
.
7
1
5
.
3
8
6
t
L
i
n
e
.
.
.
7
1
5
.
3
8
6
(DIP Switch 7)
.
8
6
6
6
.
8
6
6
6
Printed in the U.S.A.
2
memory. Use with Viking's
F
a
x
B
a
c
k
L
i
n
e
.
.
F
a
x
B
a
c
k
L
i
n
e
.
.
.
7
1
5
.
3
8
6
.
4
3
4
5
.
7
1
5
.
3
8
6
.
4
3
4
5
Advertisement
