Viking K-1700-3 Technical Practice

TECHNICAL
TECHNICAL
T
T
E L E
E L E
standard, flush mount, rough-in box (left). In addition, an optional weath-
er resistant, surface mount box is available (right).
For outdoor or harsh environments, the K-1700-3 is available with
Enhanced Weather Protection (EWP). EWP products feature rubber gas-
kets and boots, closed cell foam gasketing, hand soldered silicon sealed
connections, anti-corrosive gel filled butt connectors, as well as urethane
encapsulated circuit boards with internally sealed, field-adjustable trim
POTS and DIP switches.
P h o n e . . . 7 1 5 . 3 8 6
P h o n e . . . 7 1 5 . 3 8 6
h t t p : / / w w w . v i k i n g
h t t p : / / w w w . v i k i n g
F e a t u r e s
F e a t u r e s
• Vandal Resistant Features: 14 gauge, louvered,
stainless steel faceplate with stainless steel speaker/mic
screen, heavy duty metal keypad and "Call" button
• Optional Enhanced
Weather Protection (EWP)
• Yellow "in use" LED
• Volume adjustments for microphone and speaker
• Advanced call progress detection: disconnects on
busy signal, return to dial tone, CPC reorder tone, maxi-
mum call time out and selectable silence time out
• Selectable auto-answer feature
• Selectable push button disconnect
• Zinc plated steel rough-in box with (2) 3/4" conduit
knockouts
• Optional VE-6x7 Surface
Mount Box available
• Selectable maximum call time
• Selectable VOX switching speed
• K-1700-3-EWP conforms to NEMA requirements
S
S
C O M O L U T I O N S
C O M O L U T I O N S
Attractive, Vandal Resistant,
Handsfree, Speaker Phone
The K-1700-3 provides a tough and attractive handsfree phone for apartment,
and residential door entry or applications requiring a vandal resistant speaker
phone.
When the "Call" button is pressed, the K-1700-3 returns dial tone. The key-
pad may then be used to dial any number. If no Touch Tone is entered with-
in 8 seconds, CPC is detected, a busy signal is detected, or the programma-
ble maximum call time has elapsed, the K-1700-3 will automatically discon-
nect. Alternatively, the K-1700-3 may be dis-
connected by pressing the "Call" button
again. The K-1700-3 comes complete with a
. 8 8 6 1
. 8 8 6 1
e l e c t r o n i c s . c o m
e l e c t r o n i c s . c o m
Need More Information on EWP?
?
Call (715) 386-4345 and select 859.
Need More Information on the VE-6x7?
?
Call (715) 386-4345 and select 424.
P r a c
P r a c
2 1 C
2 1 C
F O R T H E S T
F O R T H E S T
A p p l
A p p l
• Apartment entry phone when used with the K-1900-3
Apartment Entry Dialer (Fax Back # 312) or C-3000
Apartment Entry Controller (Fax Back # 162)
• Residential gate or door entry phone when used with the
C-2000A Door Entry Controller (Fax Back # 156)
• Courtesy and customer assistance phone
• Automated teller (ATM) phone
• Security or emergency phone
• Hot-Line phone when used with the K-1900-5 Hot-Line
Dialer (Fax Back # 317)
phone on a low voltage and/or low loop current phone system exten-
sion, a TBB-1 Talk Battery Booster may be required (Fax Back # 630).
• Kiosk phone with (100 number speed dialing) when used
with the K-1900-9 Multi-Number Dialer (Fax Back # 321)
S p e c
S p e c
Power: Telephone line powered 20V DC/20mA minimum
Dimensions: Overall: 140mm x 165mm x 66mm (5.5" x 6.5" x
2.6") , Rough-in box: 114mm x 140mm x 64mm (4.5" x 5.5" x 2.5")
Shipping Weight: 1.6 kg (3.5 lbs)
Environmental: -26°C to 54°C (-15°F to 130°F)
Humidity - K-1700-3: 5% to 95% non-condensing
Humidity - K-1700-3-EWP: Up to 100% condensing
Speaker Volume: Approximately 70 db maximum @1m
Connections: Standard - (1) two-position terminal block, EWP -
Gel-filled tip and ring connectors
CPC Disconnect Time: 500ms minimum
REN #: 0.5 A
K-1700-3 &
K-1700-3 &
K-1700-3-EWP
K-1700-3-EWP
Handsfree Phone
t i c e
t i c e
with Keypad
E N T U R Y
E N T U R Y March 23, 2006
i c a t i o n s
i c a t i o n s
Note: When installing a line powered
i f i c a t i o n s
i f i c a t i o n s