Table of Contents
Advertisement
Chapter 7
6
When the WPS LED is on, the client device has successfully connected to the router.
Note:
1. The WPS LED on the router will light on for five minutes if the device has been successfully added to the network.
2. The WPS function cannot be configured if the wireless function of the router is disabled. Please make sure the
wireless function is enabled before configuring WPS.
Method 4: Enter the client device's PIN on the router
1
Visit
http://tplinkmodem.net
set for the GPON router.
2
Go to
Advanced
3
Enter the
Client's
4
Then click the
Connect
5
Device has been added successfully!
web page, which means the client device has successfully connected to the router.
or http://192.168.1.1, and log in with the password you
>
Wireless
> WPS, and click
PIN.
button.
Customize Your Network Settings
PIN
Number.
or the similar information will appear on the
80
Advertisement
Table of Contents
