Table of Contents
Advertisement
BE=2520
'@ Setting the warning point
Input the specified number
DUP
Ikey
1 thru 150
Example:
To set the warning point to 100:
"Key operation
°
vo 000:000.001.00
2
000.000.000.00
Vv
"Z
Print on journal paper and slip
@ Setting the lockout point
Input the specified number
ACCT #|key
* Lockout point 1 thru 150
Example:
To set the lockout point to 120.
—
000 :000.001.20
2
000.000.000.00
F oteeay
Print on journal paper and slip
LP-120
©
AC
(4). Return mode switch to REG position.
® Make
sure the entered code is. printed on. the journal,
then turn the mode switch back to "REG" position.
3-15. (MRS15) Selection of sentinel amount "Yes"
r "No".
To select sentinel amount
"Yes,"
enter a desired amount.
If the sentinel amount is programmed, "LL" appears in the
13th column of the display when the net total of reaches or
exceeds the programmed amount.
(1) Set the mode awiteh to "Z" position. (power switch
off):
(2) Depress numéric key [4] and[CLEAR
| key at the same
time. Turn on the power switch. After observing that
the display indicates zeroes in all 117 positions release
the keys.
Print on journal paper and slip
(3) Then, proceed to setting. The setting and key sequence
are as follows.
To program no sentinel amount
a
Input the sentinel amount
oa
ACCT #) key
max. 12 digits (min. amount: 1}
Example:
Programming the sentinel amount as $40,000.00.
Display
Key operation
4000000
000.040 .000.00
Vv
000.000:000.00 .
40.000.00
SN
(4). Return mode switch to REG position.
®
Make sure the entered sentinel amount is printed on the
journal, then set the mode switch to ""REG"' position.
Note:
@
If the sentinel amount is equal to or less than the
grand totalizer net, it is displayed accompanied
with the symbol "L" in the 13th column.
The sentinel amount is to be positive.
The sentinel amount must not be set at "0." —
3-16. (MRS-16) Calendar timer function program-
ming and choice of print format
Programming. the clock function Yes/No and selecting the
print format
(1) Setting
the
mode
switch
to
i
a
(Power
switch off)
(2) Depress numeric key [5] and [LIST] key at the same
time. Turn
on the power switch. After observing that
Advertisement
Table of Contents
