HOMCOM 820-349V80 Instruction Manual page 12

OPERATION INSTRUCTIONS
1. Turn the heater on/off by pressing the power
button on the control panel (C) or remote
control (B).
Once the power is off, the heating elements will
stop working first. The fan will continue to work
for up to 90 seconds to blow out residual heat
from inside the heater. This is normal.
2. Select a heat setting by pressing 'MODE' on
the panel (C) or remote (B).
High power: 1500W
Low power: 1000W
Note: The 'HIGH LOW LED' light will illuminate
when the unit is heating.
3. Set the temperature by pressing the arrows on
the panel (C) or remote (B).
You can set the temperature between
Once set, the heater will stay on until the
ambient temperature reaches your desired
setting. The heater will cycle and off to maintain
the desired room temperature.
NOTE: For child lock, hold 'TEMP UP' and 'TEMP
DOWN' together for five seconds on the
control panel (C). On the remote (B), hold
the child lock button for five seconds.
Repeat the above steps to turn the child
lock off.
50-90°F.
50 56
12
90