Fabric And Ironing Recommendations - Panasonic NI-GT500 Operating Instructions Manual

Fabric and ironing recommendations

Fabrics and usage method.
• Do not use the product on leather products.
• To iron heat-sensitive materials or dark-colored fabrics, test on a small corner of the fabric before ironing the entire garment to avoid
damages.
• Keep the soleplate slightly away from the clothes when ironing clothes labeled "Use press cloth" or "Cool iron".
• Iron the clothes labeled "No steam" in the dry ironing mode.
• To iron blended yarn fabrics, select the level according to the material requiring the lowest heat setting.
• To iron clothes without a fabric care label, select the level by referring to the following table.
For NI-GT500 only
Ironing method
Soleplate against Soleplate slightly away
Fabric
Acrylic
Acetate
Nylon
Silk
Wool
Cashmere
Rayon
(Chiffon)
Dry ironing only
Polyester
Cotton
Linen
20
For NI-GT200 only
Level Ironing method
Quick care Optimal Soleplate against Soleplate slightly away
care
Dry ironing only
Fabric and ironing recommendations
Fabric
Acrylic
Acetate
• Keep the soleplate about 1 cm away from the garment during ironing.
Nylon
• Iron the fluffy garment inside out to help them retain their shape.
Silk
• The recommended moving speed of the iron is about 10 cm every 3 seconds.
Wool
Cashmere
Rayon • When pressing the soleplate against the garment, place a cloth over the fabric and iron the garment by sliding the
(Chiffon) iron quickly in the dry ironing mode (without switching to the steam level).
• Ironing rayon clothes for a long time may cause shrinkage of clothes.
Polyester • The recommended moving speed of the iron is about 10 cm every second.
• Slowly move the soleplate while ironing. It may be hard to remove the wrinkle if the movement is too quick.
Cotton
• Tight creases and sharp lines may not be achieved for these kinds of clothes.
Linen
• The recommended moving speed of the iron is about 10 cm every 3 seconds.
Tips
21