Air Handling Равт5; Air Guide And Blower A - LG W081CA Service Manual

2.2 AIR HANDLING PARTS
2.2.1 AIR GUIDE AND BLOWER
1. Remove the front grille. (Refer to section 2.1.1)
. Remove the cabinet. (Refer to section 2.1.2)
. Remove the control box. (Refer to section 2.1.3)
. Remove the 4 screws which fasten the brace.
. Remove the brace.
. Remove the 2 screws which fasten the evaporator.
. Move the evaporator forward and pulling it upward
slightly. (See Figure 4)
. Move the evaporator to the left carefully.
9. Pull out the hook of orifice by pushing the tabs and Figure 4
remove it. (See Figure 5)
10. Remove the clamp with a hand plier which
secures the blower.
11. Remove the blower.
12. Remove the 4 screws which fasten the air guide
from the barrier.
13. Move the air guide backward, pulling out from the
base pan.
14. Re-install the components by referring to the
removal procedure, above.
моо + W N
со
Figure 5
Figure 6
2.2.2 FAN
. Remove the cabinet. (Refer to section 2.1.2)
. Remove the brace (Refer to section 2.2.1)
. Remove the 5 screws which fasten the condenser.
. Move the condenser to the left carefully.
. Remove the clamp which secures the fan.
. Remove the fan. (See Figure 7)
. Re-install by referring to the removal procedure.
)
сак уатты ES
Tİ
=
7 (771
4222
моо со N —
Figure 7
—11—