Table of Contents
Advertisement
3. Operation
3.1 Transport Mode
Sensors are shipped with a plastic battery insulating pull tab that must be removed before the
operation.
3.2 Default Operation
During default operation, the device will send an environmental status message to the network
once there is a sufficient delta in the environmental conditions or 5 minutes of inactivity. The
precise trigger values can be found in 4.1.1.
4. Messages
LoRaWAN Packets for this device use port 103.
4.1 Status
4.1.1 Triggers
Packet Triggers: 5-minute inactivity, ±2°C delta(environment temp), ±5 %RH
Delta, ±25 IAQ Index Delta. T he device will scan the environment every 5
minutes.
4.1.2 Payload
Port
Payload Length
Bytes
0
Field
Status
© 2019 Browan Communications Inc. All rights reserved.
103
11 bytes
1
2
3
Battery
Temp.
RH
(PCB)
4
5
6
7
CO
VOC
2
8
9
10
IAQ
Temp.
(environment)
3
Advertisement
Table of Contents
