Table of Contents
Advertisement
Troubleshooting guide
:
Power failure
sThe unit will not function during
a power failure We
recommend that you connect a
external telephone in the event
of a power failure
The unit does not work.
"The battery of the portable unit
becomes weak
Charge Ihe
battery fully (See page 10)
"The security codes on the
portable unit and the base unit
are not the same
Place lhe
portable unit on the cradle
(See page 9)
"The connection of the unit is
made improperly (See page 5 )
®You are too far from the base
urut Move closer to the base
unit
"The POWER/RINGER switch
Is set to the "OFF" position
Set to the "ON" position
The portable unit does
not ring.
«The POWER/RINGER switch
is in the "OFF" position Sel to
the "ON" position
sThe portable unit does not ring
an ihe cradle, even if the
POWER/RINGER switch is in
the "ON" position. Only the
base unit rings
The base unit does not
ring.
a The RINGER selector is in the
"OFF" position. Set to the
"HIGH" or "LOW" position
Sound flutters or fades.
s You are too far from the base
unit Approach the base unit
®The telescopic antenna is nol
fully extended
lam encountering
interference from another
unit.
s Select a clearer channel
(See page 2B )
a Set the portable unit and the
base unit away from another
electric appliances
Another person can
answer my calls.
s Select another channel
(See page 2B )
s Change the security code
(See page 9 )
The BATT LOW indicator
flashes.
sCharge the battery fully
(See page 10 )
| charged the battery for
10 hours, but the BATT
LOW indicator flashes
after a few telephone
calls.
ult is time to change the battery
Please replace it with a new
one (See page 31 )
While operating the unit,
the AC adaptor feels
warm.
s This is normal
E c em
Advertisement
Table of Contents
