Table of Contents
Advertisement
(1) 10ch REMOTE CHANGE
Indicator
.
(2) PAUSE Button:
Used to pause during a
programming or a dialing
operation.
(3) FLASH Button:
Used to access some
features of your host PBX
and your telephone
company.
(4) REDIAL Button:
Used to redial the last dialed
number.
(5) Station Buttons:
Used to store telephone
numbers and to make calls
using aulomatic dialing.
(6) LOWER Button:
Used to select the lower
memory location.
(7) PROGRAM Button:
Used to start and complete
the programming procedure.
STORE Button:
Used to store the telephone
numbers in memory.
(9) SECURITY CODE Selector:
Used to select the security
code A, B or C.
TONE Button:
Used to change the dialing
mode from pulse to lane
during a dialing operation.
(1) MUTE/PROG Indicator
(12) HOLD Button:
Used to put the calling party
on hold during a
conversalion. While holding,
the MUTE/PROG indicator
flashes.
(i3) INT'COM/IN USE Indicator
CHARGE Indicator
45) MUTE Button:
Used when you do not want
your voice to be heard by
the other party. The voice of
the other party will still be
heard.
SP-PHONE Button:
Used lo make or receive a
Phone call without using the
portable unit.
(17) PAGE/INT'COM Button:
Used lo page the portable
unit.
MIC (microphone)
Baltery Charge Contacts
(20) VOLUME Selector:
Used to adjust the sound
level from the built-in
speaker.
@1) RINGER Selector:
Used to select the ringer
volume HIGH, LOW or OFF.
@2) DIALING MODE Selector:
Used to set the dialing mode
to TONE or PULSE.
Advertisement
Table of Contents
