Greenheck Vektor-MD Installation, Operation And Maintenance Manual page 2

®
READ THROUGH THESE INSTRUCTIONS PRIOR TO STARTING ASSEMBLY.
Use Document #1016006 with fastener kits 879425 and 879426. These kits are to be used with the Vektor-MD
model. The fasteners contained within the kit are to be used to attach the windband to the Vektor-MD nozzle. Use
the images located within this document to locate the position of the fasteners on the unit.
Note:
Vektor-MD – Sizes 36 and smaller, nozzle is attached to the fan housing.
Vektor-MD – Sizes 40 and greater, windband and nozzle ships as individual pieces.
Assembly Instructions
1. See Greenheck Document #464652 (Installation, Operation
and Maintenance Manual: Vektor-MD, Vektor-MH and
Vektor-MS) for full installation instructions.
2. See image to the right to locate bolt holes. Attach
windband using the provided moly-coated 316 stainless
steel bolts through the bolt holes.
Tools Required
• Cordless drill (electric or pneumatic)
• 9/16 inch nut setter
• 9/16 inch wrench
FASTENER KIT 879425 – VEKTOR-MD SIZE 15-20
Part Description
CS,HH,.375-16X1.5,SS,316,MOLY
NUT,HEX,.375-16,SS,316
WSHR,FLAT,.313X.05X.406X.875,SS,316
WSHR,LOCK,SPLIT,.375,SS,316
Assembly Instructions
FASTENER KIT 879426 – VEKTOR-MD SIZE 22-54
Part Description
CS,HH,.375-16X1.5,SS,316,MOLY
NUT,HEX,.375-16,SS,316
WSHR,FLAT,.313X.05X.406X.875,SS,316
WSHR,LOCK,SPLIT,.375,SS,316
Assembly Instructions
Phone: (715) 359-6171 • Fax: (715) 355-2399 • E-mail: vektor.support@greenheck.com • Website: www.greenheck.com
2 Vektor-M Series ERS Fastener Kits Fastener Kit • Windband to Nozzle, Rev. 2, May 2018
Assembly Instructions
Document Instructions
Windband
Nozzle Nozzle
Part # Quantity
415781 8
415799 8
415800 16
415810 8
1016006 1
Part # Quantity
415781 12
415799 12
415800 24
415810 12
1016006 1
Document 1016006
Vektor-MD Fastener Kit
Windband to Nozzle
Laboratory Exhaust System
Bolt and Washer
3/8 inch Stainless
Steel Fasteners
Copyright 2018 © Greenheck Fan Corp.
Detail
® ®