Philips 32PF1600T/96 Service Manual page 99

4.3 Assy/Panel removal
4.3.1 IO Box
Warning: Disconnect the AC Power cord before you open the
set.
1. Place the TV set upside down on a table top, using the foam
bars (see part "Foam Bars").
Caution: do not put pressure on the display, but let the monitor
lean on the speakers or the Front cover.
2. Remove M3*6(4 pieces) from IO Box and HDMI Box
4.3.2 R&L Speaker//Back cover
1. Remove T3*8 (8 pieces) screws from the R/L speaker
2. Remove all T4*12(12 pieces) screws from the Back cover.
3.Than, remove the M3.5*6(2 pieces) from the Back cover
4.Lift the back cover from the set. Make sure that wires and flat
foilsare not damaged during the back cover removal.
4.3.3 Wall mount
1. Remove M3*4(14 pieces) screws from EMI shielding
2. Remove Io Nut(2pieces) screw from EMI shielding
3. Lift the wall mount from chassis. Make sure wires are not
damaged during the back cover removal.
4.3.11 LCD Panel
Mechanical Instructions
4.3.4 Main Board
1. Disconnect all cable from Base unit
2. Remove the fixation screws
3. Take out Main Board
4.3.5 IR Board
1. Remove the fixation screws
2. Take out Main Board
4.3.6 Power Board
1. Remove the fixation screws
2. Take out Main Board
4.3.7 Translation Board
1. Remove the fixation screws
2. Take out Main Board
4.3.8 Power-Key Board
1. Remove the fixation screws
2. Take out Main Board
4.3.9 Button Board
1. Remove the fixation screws
2. Take out Main Board
4.3.10 CPU Board
1. Remove the fixation screws
2. Take out Main Board
EN 6 4. MQC3.0A LA