Table of Contents
Advertisement
Software Update
1) Press OPEN/CLOSE to open the disc tray.
2) Insert the update CD-R disc with the software update, label
facing up.
3) Press OPEN/CLOSE to close the disc tray.
Flash Update
Do you want to update flash memory?
Version : YYMMDD.xx.VR357
Yes
* If you don't see the message above, try another disc.
Generally, this is caused by disc quality and by disc creating problem.
4) Press the ENTER button on the remote control (Fig. 4-7).
Now, processing...
Please, do not turn off the power.
5) It takes about 5 minutes to complete the update.
The message below will be displayed in the screen after update is completed and the tray will open automatically.
Flash Update
Flash memory is successfully
6) After removing the update disc, turn off the unit with power button.
And there after turn on the unit with power button and then the will be closed.
The Flash update is now completed.
4-4
-> YYMMDD.xx.VR357
No
Fig. 4-6
Flash Update
Fig. 4-8
updated.
Fig. 4-9
Fig. 4-7 Remote Control
Atfer checking old and new version, select "Yes" or "No"
with "
" or "
" on the remote control.
* The Version is indicated by "YYMMDD.xx modelname"
* If the message to the left isn't displayed after 10minutes
and the unit is no longer functioning properly, contact a
samsung authorized service center.
Samsung Electronics
Advertisement
Table of Contents
