VideoLogic GrafixStar 450 User Manual page 7

GrafixStar 450 User Guide
Removing SmartTools
Note: Removing SmartTools involves restarting Windows, so save any open documents
before you start.
Removing SmartTools from Windows 95
To remove SmartTools:
1. Click the Start button, and point to Settings.
2. Click Control Panel.
3. Click Add/Remove Programs.
4. From the list of programs displayed, click VideoLogic SmartTools, and click Add/Remove.
5. Follow the instructions that appear on the screen.
Removing SmartTools from Windows 3.1
To remove SmartTools:
1. Insert the VideoLogic Software Library CD into your CD-ROM drive.
2. Start Windows, click the File menu in Program Manager, and click Run.
3. Browse to [drive]:\gs450\win31\disk1\setup where [drive] is your CD drive, and click OK.
4. At the VideoLogic Installer screen, click Remove.
5. At the Remove screen, click GrafixStar display driver software. Click OK, and follow the
instructions that appear on the screen.
- 7 -