Advertisement
GrafixStar 450 User Guide
Customize Toolbars
With Customize Toolbars selected, you can:
•
Create new toolbars and add them to the list of toolbars on the Toolbar Properties page
by dragging applications from the Applications list onto the desktop, or by dragging one
of the buttons in the commands list onto the desktop.
•
Add buttons to toolbars by dragging them from the Commands list onto the toolbar,
move buttons by holding down the
remove buttons by holding down the
•
Add buttons for other applications to the Other Apps list and set properties for
these buttons.
Assigning hotkeys
With Customize Hotkeys selected, you can assign hotkey combinations to the commands you
use most often, using combinations of
keyboard.
Using SmartDisplay
SmartDisplay is an application that enables you to select, customize and create display modes
for your monitor. If you have never set a display mode before, or if you need help in choosing
your settings, you should use the SmartDisplay Settings Wizard. If you are familiar with
setting display modes, you should use the Advanced Settings button.
Starting SmartDisplay
1. Select the Display Properties Control Panel either by right-clicking on the Windows
desktop and choosing Properties from the menu or by clicking the Start button and
pointing at Settings, then Control Panel, then double-clicking Display.
key and dragging them along the toolbar, or
SHIFT
key and dragging them off the toolbar.
SHIFT
,
and
, plus the other keys on the
SHIFT
CTRL
ALT
- 10 -
Advertisement
