Advertisement
Captivator PCI/TV User Guide
Internal audio connector
To connect Captivator PCI TV's internal audio connector to your sound card's CD-in connector
you need an internal audio cable (part number 62575). This cable is suitable for Sound
Blaster
™
, which uses Molex 70066-G or 70400-G connectors. You can order this cable from
your Captivator PCI TV supplier.
If your sound card does not use the same connectors as Sound Blaster, you should be able to
get your local computer supplier to make up a cable, using the details of Captivator PCI TV's
audio output connector given below and the details of your sound card's CD-in connector.
Captivator PCI TV uses a Molex connector, part number 70543. The pin-outs for this
connector are as follows:
Power and temperature specifications
Captivator PCI and PCI TV operate at a nominal power rating of +1.0 Watts (1.5 Watts max), at
temperatures between 10ºC (50ºF) and 50ºC (122ºF).
Pin
1
1
2
2
3
3
4
4
- 8 -
Signal
Left channel
Ground
Ground
Right channel
Advertisement
