Advertisement
Captivator PCI/TV User Guide
2. Remove the cover from your computer. You may need to refer to the documentation
supplied with your computer for instructions on how to do this.
Note: If you are using Captivator PCI TV and you intend to connect a TV input to the tuner,
install it as far away as possible from the other cards in your computer. All computers and
cards generate radio frequency noise and this noise can affect the quality of your TV picture.
3. Locate an empty PCI bus expansion slot and remove the slot cover. Keep the screw, you
will need it later to secure the card.
4. Touch the bare metal chassis of your computer with the back of your hand to discharge
any static that may have built up on you or your clothes.
5. Align Captivator PCI/TV with the slot you have chosen. Firmly press it into the slot, as
shown in the diagram below. You will need to use some pressure to push the card into
position, but do not use excessive force.
6. Secure the card using the screw that you removed previously.
- 4 -
Advertisement
