Advertisement
Note: If you are installing Captivator PCI TV, make sure that you fit all the adaptor card fixing
screws and expansion slot covers to all unused slots to minimize radio frequency noise.
7. Replace the cover of your computer.
8. Switch on your computer and your computer monitor.
9. When your computer has restarted, you are ready to install the software.
Installing the Captivator PCI/TV software
1. When your computer has restarted, a dialog box is displayed saying that Windows has
found new hardware. Click Driver from Disk provided by Hardware Manufacturer,
and click OK.
2. Insert the VideoLogic Software Library CD into your CD-ROM drive.
3. Browse to the folder [drive]:\captipci\disk1 where [drive] is your CD-ROM drive. When
you have browsed, click OK.
4. At the Install From Disk dialog box, click OK. The drivers are copied from the CD.
5. A message is displayed notifying you of the change to your system's settings, and asking
whether you want to restart the computer. Click Yes.
6. Follow the instructions that appear on the screen.
Multimedia and Videoconferencing software
The Prolab multimedia software consists of three applications: Videowork, for multimedia
video editing; MediaScope, for playing virtually any kind of CD that your system supports; and
ImageFolio, for processing scanned images. Each application has its own folder within the
Prolab folder, and is installed by running the install.exe file in the application's disk1 folder.
The Vidcall conferencing utility is located in the utils\vidcall folder, and is zipped using Winzip.
Unzip the file, and read the file readme.dem for instructions on installation and usage.
Captivator PCI/TV User Guide
- 5 -
Advertisement
