Still Images/Movies - Sony ILX-LR1 Help Manual

Help Guide
Interchangeable Lens Digital Camera
ILX-LR1
Differences between the [Anti-flicker Shoot.] and [Var. Shutter] functions
This camera has two different functions to reduce the impact of flickering from artificial light sources (such as fluorescent
or LED light).
The features of each function and the corresponding shooting conditions are as follows.
Features and
shooting
conditions
Features
Still
images/movies
Shutter type
Exposure mode
Types of flickering
detectable
*1
The faster you set the shutter speed, the more likely there is to be a difference between the monitor display before shooting and the recorded
image. Make sure that the impact of flickering is reduced in the recorded image.
*2
Even when [Anti-flicker Shoot.] is set to [On], the camera cannot detect flickering frequencies other than 100 Hz or 120 Hz.
Hint
The impact of flickering can be reduced by using [Anti-flicker Shoot.] and [
environment where both 100 Hz/120 Hz flickering and higher-frequency flickering occur. In this case, first set [Anti-flicker Shoot.]
and [ Var. Shutter] to [On], and then adjust the shutter speed with [
Anti-flicker Shoot.
The camera can time the shooting of
images to moments when flickering will
have less of an impact by detecting the
flickering frequency automatically.
Still images only
Mechanical shutter only
P (Program Auto) / A (Aperture Priority) / S
(Shutter Priority) / M (Manual Exposure)
Flickering with a frequency of 100 Hz or
120 Hz (such as fluorescent light) only
5-055-988-11(1) Copyright 2023 Sony Corporation
You can manually or automatically adjust the
shutter speed while checking the impact of
flickering on the monitor.
When you press the center of the control wheel,
flickering is automatically detected and the
impact of flickering is removed.

Still images/movies

Electronic shutter/mechanical shutter
S (Shutter Priority) / M (Manual Exposure) with
the shutter speed adjusted manually
Flickering with a frequency of 100 Hz or 120 Hz
(such as fluorescent light) and flickering with a
*2
frequency higher than 100 Hz or 120 Hz (such
as LED light)
Var. Shutter] together even in a shooting
Var. Shutter Set.] before shooting images.
236
Var. Shutter
*1
TP1001217656