Table of Contents
Advertisement
You can lock the focus on non-moving subjects. Set [
Setting [
Focus Area] to [Center Fix] makes it easier to focus on subjects located in the center of the screen.
Hint
When the product cannot focus automatically, the focus indicator flashes. Either recompose the shot or change the focus mode or
focus area settings. In [Continuous AF] mode,
Note
An icon indicating that data is being written is displayed on the external monitor after shooting. Do not remove the memory card
while the icon is displayed. Doing so will prevent images from being recorded normally.
When you shoot at high shutter speeds with a large-aperture lens attached, out-of-focus circle produced by the bokeh effect may
get cut off because of the shutter mechanism.
When a lens from another manufacturer (including a Minolta/Konica-Minolta lens) is used, the correct exposure may not be
achieved, or the image brightness may be uneven.
When you shoot at high shutter speeds, the image brightness may become uneven depending on the shooting environment.
If the
(Overheating warning) icon appears on the external monitor, the temperature of the camera has risen. Turn the power
off and cool the camera and wait until the camera is ready to shoot again. If you continue to use the camera while the icon is
displayed, shooting may stop to protect the product.
When the power is turned on, the internal temperature of the camera rises even if the camera is not shooting. If the power is
turned on for a long time, then the power turns off or you are unable to record movies, leave the power off and wait until the
temperature drops sufficiently.
Related Topic
Selecting the focus method (Focus Mode)
Selecting the focus area (Focus Area)
Playing back still images
Auto Review (still image)
Focus Mode] to
(focus indicator) lights up.
5-055-988-11(1) Copyright 2023 Sony Corporation
76
(Single-shot AF).
TP1001198905
Advertisement
Table of Contents
