Advertisement
1
How to Update (Main MCU) 1/5
Microcomputers update
[Procedures]
for MAIN microcomputer
D
1. Unplug the AC cord.
Connect the FFC cable. ( MAIN microcomputer )
Start up application "FlashSta" on the PC.
C
2. Plug the AC cord. (STANDBY mode)
For updating of the MAIN microcomputer, proceed with
the following steps in STANDBY mode.
3. Press the OK button.
B
Note:
You need COM port number on Windows system
A
"My computer", "Right Click", "Properties", "Device manager"
Click COM port properaties and Make sure COM port number.
1
2
Select for COM port.
2
3
4
[ if the following messages are displayed ]
Please push the cancel button and press the JIG's
RESET button.
And confirm a connection of FFC.
Please return to procedure 1.
4. Select the update file and enter ID.
1 Selection of upgrade file
2 Enter ID.
Press the OK button.
3
4
5
Firmware
2. Enter ID.
Enter "ff" in all field.
3 Press OK button
Press the OK
to go to next step.
5
6
D
C
B
A
HT-R397
6
Advertisement
