QNAP QGD-1602P User Manual page 49

Important
You can check your device warranty policy or purchase an extended warranty plan at
Warranty Service.
9. Close the warranty page.
The smart installation screen opens in the default web browser.
10. Verify the operating system indicated on the screen is QTS and the version is the one you want to
install.
11. Optional: Select a different operating system version.
Note
To install QNE ADRA and configure the device for network detection and response, see the
ADRA Device (Global Edition) User Guide.
a. Click Switch OS.
b. Select an available operating system version or upload a firmware file.
c. Click Apply.
The device reboots and the smart installation screen appears with the selected operating system
version.
12. Click Start Smart Installation.
13. Specify the following information.
• NAS name: Specify a name with 1 to 14 characters. The name supports letters (A to Z, a to z),
numbers (0 to 9), and hyphens (-), but cannot end with a hyphen.
• Username: Specify an administrator username that contains 1 to 32 characters. The name
supports letters (A to Z, a to z), numbers (0 to 9), and hyphens (-), multi-byte Chinese, Japanese,
Korean, and Russian characters.
The username cannot contain the following special characters: grave accent (`), asterisk (*), equal
sign (=), plus sign (+), square brackets ([ ]), backslash (\), vertical bar (|), semicolon (;), colon (:),
apostrophe ('), quotation mark ("), comma (,), less than sign (< ), greater than sign (>), slash (/),
question mark (?), percent sign (%)
• Password: Specify an administrator password with 8 to 64 characters. The password supports all
ASCII characters.
• Confirm Password: Enter the new administrator password again.
14. Click Next.
The Set the date and time screen appears.
15. Specify the time zone, date, and time using any of the following methods:
Tip
QNAP recommends connecting to an NTP server to ensure that the device follows the
Coordinated Universal Time (UTC) standard.
Methods
Synchronize with computer or device time Select Same as the computer/device time
The device time will be the same as your computer or device
used to configure the time.
QGD Rackmount Switch User Guide
User Actions
Installation and Configuration
QNAP
48