Tape Transport In The Rewind Mode - Sony AV-3420CE Service Manual

9-7. TAPE TRANSPORT IN THE REWIND
MODE
Full torque is applied to the Supply Reel Table
to rewind the tape. The Stop Brakes are released
from both the Supply and Take-Up Reel Tables.
See Fig. 9-8.
@) supply reel table
©
lever (2)
©) brake release
Slide plate
Orive shaft and drive
shaft pulley (A)
Setting the function selector to the rewind
mode rotates the Function Select Cam to its fully
clockwise position. Rewind Release Lever (1) is
rotated clockwise as it follows the detent of the FF
Sub Cam at (A), pulling the Rewind Release Rod
in the direction indicated by the arrow, to rotate
Rewind Release Lever (2) clockwise. This releases
the Rewind Slide Plate and allows a rewind idler to
contact the Take-Up Belt (at ©) and the Take-Up
Reel Table (at (®)) to transmit driving torque.
@ take-up reel table
WY () function select cam ®
Fig. 9-8 Rewind mode tape transport
98