Sony TRINITRON KV-XR29M50 Service Manual page 34

V. CENTER ADJUSTMENT (VPOS)
1. Input Monoscope signal.
2. Activate the Service Mode.
3. Select VPOS item with
1
4. Adjust value of VPOS with
vertical size.
5. Press [MUTING] then
-
V. LINEARITY (VLIN), S CORRECTION (SCOR), EW
PARABOLA/WIDTH (EWPW), AND EW TRAPEZIUM
(EWTZ) ADJUSTMENTS
1. Input Monoscope signal.
2. Activate the Service Mode.
3. Select VLIN, SCOR, EWPW, and EWTZ with
.
4
4. Adjust with and for the best picture.
3 6
5. Press [MUTING] then
-
V LINEARITY (VLIN)
S CORRECTION (SCOR)
EW PARABOLA/WIDTH (EWPW)
EW TRAPEZIUM (EWTZ)
and .
4
and for the best
3 6
to save into the memory.
and
1
to save into the memory.
HORIZONTOL PARALLELOGRAM (HPAR), H BOW
(HBOW), UPPER PIN (UCOP) AND LOW PIN (LCOP)
ADJUSTMENTS
1. Input Monoscope signal.
2. Activate the Service Mode.
3. Select the HPAR, HBOW, UCOP, and LCOP with
and .
4
4. Adjust with and
3
5. Press [MUTING] then
HORIZONTOLPARALLELOGRAM (HPAR)
HORIZONTOL BOW (HBOW)
UPPER PIN (UCOP)
LOW PIN (LCOP)
– 33 –
KV-XR29M50/XR29M53
for the best picture.
6
to save into the memory.
-
RM-W104
1