Connecting Optional Components - Sony TRINITRON KV-SZ252M50 Service Manual

x Connecting optional components
You can connect a wide range of optional components to your TV. Connecting
cables are not supplied.
Connecting to the TV (front)
Connecting to the TV (rear)
Antenna
cable
VCR DVD player
• If you connect a VCR to 8 (antenna input), preset the signal output from the VCR to the
program number 0 on the TV (see page 15).
• If your DVD player can output interlace and progressive mode signals, select the
interlace output when connecting to
can receive either 525i/60Hz or 625i/50Hz interlace signals.
• The component video terminals on your DVD player are sometimes labeled Y/C
Y/P /P Y/C
B R,
• If you select "DVD" on your TV screen, the signal from the T (monitor output)
terminals will not be output properly. This does not indicate a malfunction.
1
(MONO) L
R
Audio
cable
Audio/
Video cable
L R
L R
DVD player
/C or Y/B-Y/R-Y.
b r
Audio/Video
Y
C
B
L
(MONO)
C
R
R
Component
Video cable
C C Y
R B
★
This terminal is not
available for KV-SK29M80.
The icon position of other
terminals may be different.
(component video input) on your TV. Your TV
cable
Camcorder
Headphones
Audio system
L
Audio/
R
Video
cable
VCR
/C
B R,
GB
7