Sony Trinitron WEGA KV-SZ292 Operating Instructions Manual
Hide thumbs
Also See for Trinitron WEGA KV-SZ292:
- Operating instructions manual (70 pages) ,
- Operating instructions manual (19 pages) ,
- Operating instructions manual (36 pages)
Related Manuals for Sony Trinitron WEGA KV-SZ292
Summary of Contents for Sony Trinitron WEGA KV-SZ292
- Page 1 3-213-721-12 (1) Trinitron Color TV Operating Instructions • Before operating the unit, please read this manual thoroughly and retain it for future reference. KV-SZ292 KV-SZ252 © 2007 Sony Corporation...
-
Page 2: Specifications
Specifications KV-SZ252M50 KV-SZ292M50 Note Power requirements 110-240 V AC, 50/60 Hz Power consumption (W) Indicated on the rear of the TV Television system B/G, I, D/K, M Color system PAL, PAL 60, SECAM, NTSC3.58, NTSC4.43 Channel coverage VHF : E2 to E12 /UHF : E21 to E69 / CATV : S01 to S03, S1 to S41 UHF : B21 to B68 /CATV : S01 to S03, S1 to S41 VHF : C1 to C12, R1 to R12 /... - Page 3 WARNING • Dangerously high voltages are present inside the TV. • TV operating voltage: 110 – 240 V AC. • Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground.
- Page 4 Securing the TV To prevent the TV from falling, use the supplied screws and band to secure the 20 mm 3.8 mm screws band Screw the band to the TV stand and to the provided hole at the rear of your TV. (1) Screw one end of the band to the provided hole at the rear of your TV.
-
Page 5: D Getting Started
Getting Started Step 1 Insert the batteries (supplied) into the remote. • Do not use old or different types of batteries together. Step 2 Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV. •... - Page 6 Setting up your TV (“Initial Setup”) When you turn on your TV for the first time, the “Initial Setup” menu will appear. You can adjust settings below using the buttons on the remote control or TV front panel. Press V , v , B or b to select or adjust items, then press Select the desired menu language.
-
Page 7: Connecting Optional Components
Connecting optional components You can connect a wide range of optional components to your TV. Connecting cables are not supplied. Connecting to the TV (front) Audio/Video cable Camcorder Headphones Connecting to the TV (rear) Audio System Audio/ Video cable Audio Component cable Video cable... -
Page 8: G Troubleshooting
• Count the number of times the 1 (standby) indicator flashes. Press 1 on the TV to turn it off, disconnect the AC power cord and inform your dealer or Sony service center of how the indicator flashes (duration and interval). -
Page 9: Tv Buttons And Remote Control
TV buttons and remote control Turn off or turn on the TV. Wake Up indicator. Standby indicator. Remote control sensor. PROG +/– Select program number. 2 +/– Adjust volume. Select TV or video input. WEGA GATE menu operations (see I) Select or adjust items. - Page 10 TV buttons and remote control (continued) Not function for your TV. Select picture mode options: “Vivid”, “Standard”, “Custom”* (see J). * When the “Custom” mode is selected, you can receive the last adjusted picture settings from the “Picture Adjustment” option in the menu. WEGA GATE menu operations (see I) Confirm selected items.
-
Page 11: Wega Gate Navigator
WEGA GATE navigator WEGA GATE is a gateway that allows you access to preset TV channels, connected external inputs and “Settings” menu. WEGA GATE External Inputs “TV” watch the preset TV Settings channels (see E) Select Confirm Select Confirm External Inputs Video 1 “External Inputs”... -
Page 12: Picture Setting
“Picture” setting Press WEGA GATE and select “Settings”. Picture Make sure the “Picture” icon ( ) is selected, Picture Mode: Vivid Picture Adjustment then press Color Temperature: Cool High Intelligent Picture: Signal Level Indicator: Select Confirm “Picture Mode” Choose either “Vivid” (bright, contrast and sharp), “Standard”... -
Page 13: Sound Setting
“Sound” setting Press WEGA GATE and select “Settings”. Sound Balance Press V or v to select the “Sound” icon ( ), then press Select Confirm “Balance” Press v or B to emphasize the left speaker. Press V or b to emphasize the right speaker. -
Page 14: "Channel Setup" Setting
“Channel Setup” setting Press WEGA GATE and select “Settings”. Channel Setup Auto Program Press V or v to select the “Channel Setup” Manual Program Program Sorting/Edit icon ( ), then press Select Confirm “Auto Program” Preset channels automatically. “Manual Program” Manually preset desired channels and channels that cannot be preset automatically (see Presetting channels manually). - Page 15 “Channel Setup” setting (continued) Presetting channels manually After selecting “Manual Program”, select the program number to which you want to preset a channel. (1) Make sure “Program” is selected, then press (2) Press V or v until the program number you want to preset appears on the menu, then press Select the desired channel.
- Page 16 “Setup” setting Press WEGA GATE and select “Settings”. Setup Language: English Press V or v to select the “Setup” icon ( ), Picture Position Video Label then press Color System: Auto Factory Settings Select Confirm “Language” Change the menu language. Press V or v to select either “English”...