Table of Contents
Advertisement
2019/05/27 19:43:09 (GMT+09:00)
Service Adjustment
4 8 3 : Smart Cloning Functions (1)
4-8-3 : Smart Cloning Functions (1)
( I ) Exporting functions
Before you export your Hotel TV settings,
A)
Make sure that all the settings including channel, picture, sound and
Hotel Menu are correct.
B)
Prepare a blank USB memory. The USB memory does not require
any special "tree structure". It should best be completely blank.
1. Insert a blank USB memory into the USB slot.
2. Click on "Export Hotel Settings" in the "Hotel Menu Mode".
3. The following message will appear:
4. The following message will appear, when you have successfully
exported the "Mother TV" settings to the USB memory.
Note: After this process, please keep in mind to do "AC Power Off"(AC Cable
disconnect) for exported TV set.
( II ) Importing functions
NOTE
Any settings done and exported from a "Mother TV" can
y
only be imported on the same series of TVs (any size).
1. To copy the settings from the USB memory to "Child TVs", you must first put
"Child TVs" into "Hotel Menu Mode" or "Hotel Mode".
2. Insert the prepared USB memory into a USB slot on a "Child TV".
3. Once the TV has detected the USB memory, please do the following
sequence.
<Switch OFF the AC Supply> <Switch ON the AC Supply> in few seconds.
4. The LED Green will blinking during importing process :
Sample of
screen
5. Then the TV will automatically reboot in "Hotel Menu Mode" after successfully
imported the settings to a "Child TV".
g
p
LED Display
y
LED
Blinking
Blinking
y
162
SYS SET
Advertisement
Table of Contents
