Table of Contents
Advertisement
2019/05/27 19:43:09 (GMT+09:00)
Remark #2:
Data Recall only will reset current Color Temp. data to default. For this case
only Cool Color Temp. will be reset to TV set. To reset Neutral and Warm
adjustment we need to change Color Temp. to intended Color temp. and
adjustment we need to change Color Temp to intended Color temp and
execute Recall Data operation again.
Data Save is needed for every Color Temp. once Recall Data is executed to
save the default data
7)
To get original WB data if panel or Board is changed, please execute Data recall for each color temp.
Press
Press
8)
AC Off and ON is needed after Recall data.(For function 6(ii)).
Short time flicker (White pattern changes 3 times) can be observed to verify the Copy Data operation is working.
Screen Sample
Press Enter
Press Enter
Screen Sample
Return to
original WB
data
SYS SET
Advertisement
Table of Contents
