Icy Box MS03-EU1.0 Instruction Manual page 5

STEP 1: (Continued)
Option B: Grommet Base Installation
1. If the existing grommet hole comes with a plastic protector, remove it to ensure a at
surface before installing the desk mount.
2. Loosen the screws, separate Bolt (d1) from the "C"-Clamp (d).
DESK
ø
10mm~60mm
DESK
3. Install the Grommet Base Plate (f) to the Pole (a) using 3pcs M5×16 Bolts (C), and
tighten using the Allen Key (G 3mm).
4. Using the Bolt (d1) through the support plate (g) and grommet hole in desktop.
5. Tighten the Support Plate (g) to the desktop using the plastic knob or Allen Key
(G 6mm).
a
f
C
G 3mm
Plastic Knob
d
04
d1
a
g
d1
G 6mm