Page 1
6D102E-2 ENGINE This material is proprietary to Komatsu America Corp. and is not to be reproduced, used, or disclosed except in accordance with written authorization from Komatsu America Corp. It is our policy to improve our products whenever it is possible and practical to do so. We reserve the right to make changes or improvements at any time without incurring any obligation to install such changes on products sold previously.
Page 2
California Proposition 65 Warning This machine may contain mercury in two areas: a.) The display monitor contains mercury if it has a mercury label attached. b.) Optional HID bulbs contain mercury (if the machine is so equipped). There is no risk of exposure unless the bulbs are broken. However, the monitor and/or lamps must be reused, recycled or properly disposed of in accordance with Local, State and Federal Laws at the end of their useful lives.
Page 3
Komatsu warrants to the ultimate purchaser and each subsequent purchaser that the engine is designed, built and equipped so as to conform, at the time of sale by Komatsu, with all U.S. Federal emission regulations applicable at the time of manufacture and that it is free from defects in workmanship or material which would cause it not to meet these regulations within five years or 3,000 hours of operation, whichever occurs first, as measured from the date of delivery of the engine to the ultimate purchaser.
Page 4
Find manuals at https://best-manuals.com...
Page 5
INTRODUCTION PC200/220LC-7L Find manuals at https://best-manuals.com...
Page 6
If this manual has been lost or has become dirty and cannot be read, request a replacement manual imme- diately from Komatsu or your Komatsu distributor. If you sell the machine, be sure to give this manual to the new owners together with the machine.
Page 7
Continuing improvements in the design of this machine can lead to changes in detail which may not be reflected in this man- ual. Consult Komatsu or your Komatsu distributor for the latest available information of your machine or for questions regard- ing information in this manual.
Page 8
INTRODUCTION INTRODUCTION This Komatsu HYDRAULIC EXCAVATOR is designed to be used mainly for the following work: ● Digging ● Leveling ● Ditching ● Loading ● Demolition See “RECOMMENDED APPLICATIONS” on page 2-113. DIRECTIONS OF MACHINE In this manual, the terms front, rear, left, and right refer to the travel direction as seen from the operator's cab when the opera- tor's cab is facing the front and the sprocket is at the rear of the machine.
Page 9
INTRODUCTION PRODUCT INFORMATION When requesting service or ordering replacement parts, please inform your Komatsu distributor of the following items. MACHINE SERIAL NUMBER PLATE AND ITS LOCATION On the bottom right of the operator's cab ENGINE SERIAL NUMBER PLATE AND ITS LOCATION On the top of the No.1 cylinder head cover (The EPA auxiliary nameplate is on the top of the No.
Page 10
INTRODUCTION SERVICE METER LOCATION On top of the machine monitor. YOUR MACHINE SERIAL NUMBERS AND DISTRIBUTOR Machine Serial No. Engine Serial No. Distributor Name Address Service Personnel Phone/Fax PC200/220LC-7L Find manuals at https://best-manuals.com...
Page 11
INTRODUCTION TABLE OF CONTENTS INTRODUCTION FOREWORD ..............0-2 SAFETY INFORMATION .
Page 12
INTRODUCTION UNAUTHORIZED MODIFICATIONS ..........1-13 SAFETY AT JOBSITE .
Page 21
SAFETY Please read and make sure that you fully understand the precautions described in this manual and the safety labels on the machine. Read and follow all safety precautions. Failure to do so may result in serious injury or death. This safety section also contains precautions for optional equipment and attachments.
Page 22
There are also other labels in addition to the warning signs and safety labels; handle those labels in the same way. ● Replace damaged, lost or illegible labels. For details of the labels part numbers, see this manual or the actual label, and place an order with Komatsu distributor. POSITION FOR ATTACHING SAFETY LABELS PC200/220LC-7L...
Page 23
Read manual and labels before operation and maintenance. Follow instructions and warnings in manual and in labels on machine. Keep manual in machine cab near operator. Contact Komatsu distributor for a replacement manual. Precautions before operation (09802-03000) To prevent SEVERE INJURY or DEATH, do the following before moving machine or its attachments: ●...
Page 24
SAFETY Warnings for high voltage (09801-03002) Hazardous voltage hazard. Serious injury or death can occur if machine or attachments are not kept safe distance away from electric lines. Warnings when opening front window (09839-03000) To open or close the front or ceiling window, never stand up from the operator’s seat before throwing the safety lock lever to the LOCK position.
Page 25
TURN. Turning lubricator further could cause lubricator and grease to fly off and hurt you. See manual for adjustment instructions. ● When loosening track shoe, if it does not loosen after turning lubricator ONE TURN, ask Komatsu dealer or distributor to disassemble. PC200/220LC-7L...
Page 26
SAFETY 11. Precautions when handling cable (09808-03000) Improper use of booster cables and battery cables can cause an explosion resulting in serious injury or death. ● Follow instructions in manual when using booster cables and battery cables. 12. Be cautious of moving parts when testing and adjusting while engine is running (09667-03001) While engine is running: 1.
Page 27
SAFETY 15. Roll-over precautions (09805-13000) NEVER be on this hood. 16. Prohibited to enter within swing range (09133-23000) Keep off swing area 17. Precautions when handling battery (09664-30082) EXPLOSIVE GASES Cigarettes, flames or sparks could cause battery to explode. Always shield eyes and face from battery.
Page 28
SAFETY SAFETY INFORMATION SAFETY RULES ● Only trained and authorized personnel should operate and service the machine. ● Follow all safety rules, precautions and instructions when operating or maintaining machine. ● If you are under the influence of alcohol or medication, your ability to safely operate or repair your machine may be severely impaired, putting yourself and everyone else on your jobsite in danger.
Page 29
SAFETY KEEP MACHINE CLEAN ● Do not use water or steam to wash the electrical system (sensors, connectors). If water gets into the electrical system it will cause malfunctions or faulty operation. ● Always keep the machine clean. There is the danger that you may slip and fall, or that dirt or mud will get into your eyes if you inspect or service the machine while dirty with mud or oil.
Page 30
SAFETY HANDRAILS AND STEPS Prevent personal injury caused by slipping or falling off the machine by following these steps: ● Use the handrails and steps marked by arrows in the diagram on the right when getting on or off the machine. ●...
Page 31
This as a preview PDF file from best-manuals.com Download full PDF manual at best-manuals.com...