Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ViewSonic PJ506ED
Summary of Contents for ViewSonic PJ506ED
- Page 1 ViewSonic ® PJ506ED DLP Projector - User Guide - Guide de l’utilisateur - Bedienungsanleitung - Guía del usuario - Guida dell’utente - Guia do usuário - Användarhandbok - Käyttöopas - Pyководство пользователя - 使用手冊 (繁體) - 使用手冊(简体) Model No. : VS11452...
-
Page 2: Compliance Information
The mark shown to the rght s n complance wth the Waste Electrcal and Electronc Equpment Drectve 2002/96/EC (WEEE). The mark ndcates the requrement NOT to dspose the equpment as unsorted muncpal waste, but use the return and collecton systems accordng to local law. ViewSonic PJ506ED... -
Page 3: Important Safety Instructions
n any way, such as: f the power-supply cord or plug s damaged, f lqud s splled onto or objects fall nto the unt, f the unt s exposed to ran or mosture, or f the unt does not operate normally or has been dropped. ViewSonic PJ506ED... -
Page 4: Declaration Of Rohs Compliance
0.4% lead by weght and as a cooper alloy contanng up to 4% lead by weght. ViewSonic Proposed Maximum Concentration 0.1% 0.1% 0.01% 0.1% 0.1% 0.1% Actual Concentration < 0.1% < 0.1% < 0.01% < 0.1% < 0.1% < 0.1% PJ506ED... -
Page 5: Copyright Information
Model Number: Document Number: Serial Number: Purchase Date: The lamp n ths product contans mercury. Please dspose of n accordance wth local, state or federal laws. ViewSonic For Your Records PJ506ED VewSonc DLP Projector VS11452 PJ506ED-1_UG_ENG Rev. 1A 03-12-07 PJ506ED... -
Page 6: Safety Instructions
6. The wall socket should be near the unt and easly accessble. 7. Do not place the projector where the cord can be stepped on as ths may result n frayng or damage to the lead or the plug. Be alert to trppng hazards. - Page 7 15. When you replace the projector lamp, never touch the new bulb wth your bare hands. The nvsble resdue left by the ol on your hands may shorten the bulb life.
-
Page 8: Notes On Ac Power Cord
AC Power Cord does not match your AC outlet, contact your sales dealer. Ths projector s equpped wth a groundng type AC lne plug. Make sure that your outlet fits the plug. Do not defeat the safety purpose of this grounding type plug. We hghly recommend usng a vdeo source devce also equpped wth a groundng type AC line plug to prevent from signal interference due to voltage fluctuation. -
Page 9: Table Of Contents
Advanced (Computer / Vdeo Mode) ...23 Audo (Computer / Vdeo Mode) ...23 Maintenance ...24 Cleanng the Lens ...24 Cleanng the Projector Housng...24 Replacng the Lamp ...25 Specifications ...27 Appendix ...28 LED Indcator Messages ...28 Compatblty Modes ...29 Troubleshootng ...30 ViewSonic PJ506ED... -
Page 10: Introduction
Introduction Projector Features The projector ntegrates hgh-performance optcal engne projecton and a user-frendly desgn to delver hgh relablty and ease of use. The projector offers the followng features: Sngle chp 0.55” Texas Instruments DLP SVGA (800 x 600 pxels) 1.1X manual zoom lens Auto mage re-szng (Auto-Sync.) to 800 x 600 full screen wth scalng compresson... -
Page 11: Package Contents
Package Contents When you unpack the projector, make sure you have all these components: Projector wth Lens Cap S-Vdeo Cable Remote Control (IR) wth Lthum battery Optonal Accessory: VGA (D-SUB) to HDTV (RCA) Cable Save the original shipping carton and packing material; they will come in handy if you ever to ship your unit. -
Page 12: Projector Overview
Projector Overview Front View Ventlaton holes Projecton lens Front IR remote control sensor Lens cap Elevator foot ViewSonic Elevator button Zoom rng Focus rng Control panel PJ506ED... -
Page 13: Rear View
Connecton ports Elevator button Elevator foot Speaker AC power socket Kensngton lock Bottom View Lamp cover Celng mount This projector can be used with a ceiling mount for support. The ceiling mount is not included in the package. ViewSonic PJ506ED... -
Page 14: Using The Product
Refer to “LED Indcator Messages”. Button Functon Power Turns the projector on or off. Keystone / Adjusts mage dstorton caused by tltng the projector. Auto Automatcally adjusts frequency and phase. Ths functon s avalable for computer mode only. Menu Dsplays or exts the on-screen dsplay menus. -
Page 15: Connection Ports
Connection Ports SERIAL When operatng the projector va a computer, connect ths to the controllng computer’s RS-232C port. USB (COMPUTER) This connector is for page up �� down mouse control function and firmware update. This connector is for page up �� down mouse control function and firmware update. -
Page 16: Remote Control
5. Mouse control buttons (Computer mode only) These buttons have same functon as a PC mouse. Ths functon s only avalable when the projector s connected to a computer va a USB cable. 6. Page down/Page up (Computer mode only) Ths button has same functon as Page Down/Page Up button n a PC keyboard. -
Page 17: Battery Replacement
Remove batteries from remote control when not using for extended periods. Do not dispose of the used battery along with household waste. Dispose of used batteries according to local regulations. Danger of explosion may happen if batteries are incorrectly replaced. Replce all the batteries with new ones. ViewSonic PJ506ED... -
Page 18: Remote Control Operation
Do not drop the remote control or jolt it. Keep the remote control out of locations with excessively high temperature or humidity. Do not get water on the remote control or place wet objects on it. Do not disassemble the remote control. ViewSonic PJ506ED... -
Page 19: Installation
The figure above is a sample connection. This does not mean that all of these devices can or must be connected simultaneously. The cables that come with the projector may differ from the above illustration. The included cables are based on actual shipment delivery. -
Page 20: PowerNg On/Off The Projector
When the Power LED begns flashng, the projector has entered standby mode. If you wsh to turn the projector back on, you must wat untl the projector has completed the coolng cycle and has entered standby mode. Once n standby mode, smply press 4. -
Page 21: Adjusting The Projected Image
Adjusting the Projected Image Adjusting the Projector Height The projector s equpped wth an elevator foot to adjust the mage heght. To rase the mage: 1. Press the elevator button. 2. Rase the mage to the desred heght angle, then release the button to lock the elevator foot nto poston. -
Page 22: Adjusting The Projector Zoom And Focus
1. Focus the mage by rotatng the focus rng. A stll mage s recommended for focusng. 2. Adjust the mage by rotatng the zoom rng. Rotate to the rght to reduce the mage. Rotate to the left to enlarge the mage. ViewSonic PJ506ED... -
Page 23: Adjusting Projection Image Size
Position the projector in a horizontal position; other positions can cause heat build-up and damage to the projector. Make sure the heat ventilation holes are not blocked. Do not use the projector in a smoky environment. Smoke residue may cause buildup on critical parts. ViewSonic 137.40... -
Page 24: Menu Operation
Menu Operation The projector has multlngual On Screen Dsplay menus that allow you to make mage adjustments and change a varety of settngs. ViewSonic PJ506ED... -
Page 25: How To Operate
3. Adjust the settngs wth / buttons. 4. To return to the man menu, toggle button. 5. To ext OSD, press Menu button. The OSD menu wll close and the projector wll automatcally save the new settngs. -
Page 26: Image (Computer / VDeo Mode)
Press to darken the mage. Press to lghten the mage. Keystone Adjusts mage dstorton caused by tltng the projector. Aspect Ratio Use ths functon to choose your desred mage sze. 1 :1: Keep the mage wth orgnal wdth-heght rato. ... -
Page 27: Deo (VDeo Mode)
H.Position (Horizontal Position) Press to move the mage left. Press to move the mage rght. V.Position (Vertical Position) Press to move the mage down. Press to move the mage up. ViewSonic PJ506ED... -
Page 28: Language (Computer / VDeo Mode)
YPbPr Auto Shutdown Uses ths functon to automatcally turn off the lamp f the projector does not detect an input signal for specified time period (30 minutes). OSD Timeout Duraton OSD menu stays actve (at dle state by second). -
Page 29: Maintenance
Warning: Never open any of the covers on the projector. Dangerous electrcal voltages nsde the projector can cause severe njury. Do not attempt to servce ths product yourself. Refer all servicing to qualified service personnel. Cleaning the Lens Gently wpe the lens wth lens cleanng paper. -
Page 30: Replacing The Lamp
The inorganic mercury is involved in the lamp. If the lamp bursts, the mercury inside the lamp will go out of the projector. Leave the area immediately if the lamp shatters while being operated and ventilate the area for at least 30 minutes in order to avoid the inhalation of mercury fumes. - Page 31 Do not reuse the old lamp. This could cause the lamp to explode. Be sure to turn off the projector and unplug the AC power cord before replacing the lamp. Do not use the projector with the lamp cover removed.
-
Page 32: Specifications
31 - 79 KHz 56 - 85 Hz 1 x 1W Multfunctonal Multlanguage -20 - + 60°C 0 - + 40°C 30% - 85% maxmum AC 100 – 240V, 50 / 60 Hz 280W 255.5 x 223 x 101.5 3.0kg (6.6lb) PJ506ED... -
Page 33: Appendix
Do not unplug the power cord or turn the power swtch off before the lamp LED turns off. The fan motor wll turn off when the lamp has cooled. Temperature s too hgh. The lamp wll turn off. PJ506ED... -
Page 34: Compatibility Modes
72.1 72Hz 75.0 75Hz 60.0 60Hz 70.0 70Hz 75.0 75Hz 84.9 85Hz 74.5 60Hz 60.0 60Hz 75.0 75Hz 60.0 60Hz 60.0 60Hz 75.0 60Hz 75.0 75Hz 75.0 75Hz 66.7 66Hz Vertical Frequency (Hz) 60 Hz 60 Hz 30 Hz PJ506ED... -
Page 35: TroubleshootNg
Troubleshooting Refer to the symptoms and measures lsted below before sendng the projector for repars. If the problem perssts, contact your local reseller or servce center. Please refer to “LED Indcator Messages” as well. Symptom No power. Power goes out during use. - Page 36 Replace wth a new battery. Use the remote control wthn the effectve range. Check that there are not obstructons between the remote control and projector. Check that there are not any fluorescent or other brght lghts shnng at the projector’s nfrared remote sensor. PJ506ED...
-
Page 37: Customer Support
Contact your reseller AUS=1800 880 818 servce@au.vewsonc.com NZ=0800 008 822 T= 65 64616044 servce@sg.vewsonc.com T= 886 2 2246 3456 servce@sd.vewsonc.com F= 886 2 2249 1751 T= 852 3102 2900 servce@hk.vewsonc.com T= 853 700 303 servce@hk.vewsonc.com T= 080 265 9080 servce@kr.vewsonc.com PJ506ED... -
Page 38: Limited Warranty
Europe: 3 years for all parts excludng the lamp, 3 years for labor, 1 year for the orgnal lamp from the date of the first consumer purchase. Other regons or countres: Please check with your local dealer or local ViewSonic office for the warranty nformaton. - Page 39 Canada, contact VewSonc or your local VewSonc dealer. The warranty perod for ths product n manland Chna (Hong Kong, Macao and Tawan Excluded) s subject to the terms and condtons of the Mantenance Guarantee Card. 4.3: Projector Warranty ViewSonic PRJ_LW01 Rev. 1g 06-30-06 PJ506ED...