Samsung HG43CU700 Series Install Manual page 23

Editing the Channel Number
Change the channel number of a channel you select. To change a
channel number, follow these steps:
1. Select a channel on the Channel Edit screen.
2. Use the directional buttons on the remote control, move the focus
to Edit Channel Number, and press the Select button.
3. Use the up or down directional buttons on the remote control to
change the channel number.
4. Move the focus to OK when done, and then press the Select
button on the remote control.
– When you change the channel number, the channel
information is updated automatically.
Rename the Channel
Change the name of a channel you select. To change the name of a
channel, follow these steps:
1. Select a channel on the Channel Edit screen.
2. Use the directional buttons on the remote control, move the focus
to Rename Channel, and then press the Select button.
3. Use the on-screen keyboard that appears to enter the new
name for the channel. Use the directional buttons on the remote
control, move the focus a letter or number, and then press the
Select button. Repeat for each letter or number you want to enter.
4. When finished, move the focus to Done, and then press the Select
button on the remote control.
Assigning the Channel Number to the external device
The external device source of the TV are displayed in the last page of
the Channel Editor menu as shown below.
1. Select a external device source on the Channel Edit screen.
2. Use the directional buttons on the remote control, move the focus
to Edit Channel Number, and press the Select button.
3. Use the up or down directional buttons on the remote control to
assign the channel number.
4. Move the focus to OK when done, and then press the Select
button on the remote control.
– Once you assign a channel number to an external device, you can
enter the external device without opening the TV source menu.
English - 23
▼