Samsung HG43CU700 Series Install Manual page 16

Hotel Option menu Item Description
DRM
DRM Mode Configures DRM support.
• OFF: Turns off DRM support.
• LYNK DRM: Select to turn on LYNK CAS
support only.
• Pro:idiom: Select when there are any
Pro:Idiom channels.
• LYNK DRM, PI: Select when there are
LYNK-DRM and Pro:Idiom channels at the
same time.
System
Self Diagnosis for HTV Lets you check the state of Pro:Idiom and
its communication with the SI STB or SBB. If
you have any problems with the Pro:idiom
encryption channel or the communications
with the SI STB or SBB, use this diagnosis
function. If PI DTV Channel Key Loss (Pro:Idiom
DTV Channel Key Loss) appears to have failed
and the Pro:Idim encryption channel has failed
to play content, first check the broadcasting
systems related to Pro:Idiom encryption. If
your broadcasting system does not have a
problem, contact Samsung Service. If STB SI
Vendor Setting appears to have failed and
communication with the SI STB or SBB has
failed, first check your SI STB or SBB. If your SI
STB or SBB does not have a problem, contact to
Samsung Service.
Self Diagnosis for TV Run the Device Care menu.
• Video Test: Use this test when you
experience a problem with your TV's video.
• Smart Hub Connection Test: Use this test
when you experience a problem with your
TV's smart hub.
• HDMI Troubleshooting: Use this test when
you experience a problem with your TV's
HDMI connection.
• Start Picture Test: Use this test when you
experience a problem with your TV's picture.
• Start Sound Test: Use this test when you
experience a problem with your TV's sound.
• Signal Information: Show digital
broadcasting signal information.
• Reset Smart Hub: Reset the Smart Hub
and Samsung account settings stored on
your TV.
System Manager Gives you direct, immediate access to System
Manager functions such as Time, Language,
Change PIN.
System Manager allow you to adjust your TV's
system and customize settings for your viewing
environment.
Hotel Option menu Item Description
OTN Update
SW Update
Remote Management
About This TV
Standby LED
TV Reset
LYNK Cloud
Enrollment
Enrollment Status
*Virtual Standby
Virtual Standby Mode
Reboot Time
Room Number
You can set the room number of the TV's location.
• *: This function is available when Enrollment Status in LYNK
Cloud is set to ON.
• Refer to the manual of each solution for details about functions
and settings of the solutions such as LYNK Cloud.
English - 16
Lets you upgrade the TV Software over the
network when a valid upgrade file is present
on server.
• OTN Update changed to ON and disabled
when Enrollment Status in LYNK Cloud
is Yes.
Lets you upgrade the TV Software with a USB
device.
Allow the Samsung Call Center to remotely
access and troubleshoot your TV when you need
assistance.
Display the Samsung website, and product and
software information.
When the TV is in standby mode, you can
configure the settings of the power indicator.
• ON: The LED is on.
• OFF: The LED is off.
Returns all settings on the TV to their factory
defaults.
Lets you enroll the TV with LYNK Cloud solution.
Check the status of the TV enrollment in the
LYNK Cloud service.
When the AC power cord is plugged in and
the power is off, this option maintains the TV's
important features even after the screen is off.
• Electricity consumption may vary
depending on the environment.
After the TV power is off (in Virtual Standby
Mode) if there is no input from the user within
the set Reboot Time, the TV will reboot and
enter Virtual Standby Mode again.