Advertisement
Step 4
Fit Front Lower Tube (01) (LABELS "D") to Front Mounting Bracket (07) using the Small round
U Bolt (12) M10(25T) x 26(W) x 47(L). Top of the tube should be positioned in line with the slot
in the mounting bracket plate as shown in image.
Join by sliding the Rear Lower Tube (03) in the end of the Front Lower Tube (01). Adjust
position of Rear Mounting Bracket Assy (14) if required. Fit Rear Lower Tube (03) (LABELS "C")
to Rear Mounting Bracket Assy (14) using the Small round U Bolt (12) M10(25T) x 26(W) x
47(L).
14
LABEL
Bolt
C
03
JOIN IN TUBE
Step 5
Figure 1
Slide the Front Support Tube upper RH (02) into the end of the Lower Tube (01) and secure to
Front Mounting Bracket (07) with a Small Round U Bolt (12) M10(25T) x 26(W) x 47(L).
RIGHT ="A"
LEFT = "B"
LABEL
"D"
01
LABEL
D
01
02
D600
DSG045
Slot alignment
with Top of the Tube
07
12
07
6
Advertisement
